User manual ZENITH XBV323 OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | XBV323 | DVD Player + Video Cassette Recorder © Copyright 2003, Zenith Electronics Corporation. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] When you have already entered a password; Enter a 4-digit password using the numerical buttons to confirm the personal 4-digit security password, then press SELECT/ENTER. If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. Select 1 buttonsthe Country Code option using the v/V on the setup menu. 5 Press 2 to shift to second character and select the second character using v/V buttons. SELECT/ENTER to confirm Country 6 Press selection, then press SETUPyourexit the Code to menu. ote Confirmation of the 4-digit password is necessary when the password is changed (see Changing the 4-digit password below ). Changing the 4-digit password 1 Follow Steps 1-2 as shown above to the left (Rating). 5 Enter exactly the same password a second time and verify by pressing SELECT/ENTER. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. You must enter the 4-digit password or change the rating level in order to play the disc. to confirm your 5 Press SELECT/ENTERSETUP to exit therating selection, then press menu. If you forget your 4-digit password If you forget your password, to clear the current password follow the procedure below. 2 Enter the 6-digit number 210499 and then press SELECT/ENTER. The 4-digit password is cleared. 3 Enter a new password as shown above to the left (Rating). 20 Tape Operation Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV's source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Set the Output Source to VCR as shown in "Selecting the Output Source" on page 6. Search This function lets you quickly and visually search for a desired tape section in either direction: forward or reverse. The DVD+VCR will be activated in the SEARCH mode. If the DVD+VCR is left in the SEARCH mode for more than 3 minutes, the DVD+VCR will automatically enter the PLAY mode, to protect the tape and video heads. 1 Insert a prerecorded video cassette. The indicator will light and the DVD+VCR will power-up automatically. If a tape without a safety tab is inserted, the unit will start playback automatically. 2 To return to playback, press PLAY (H). Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP (X) during playback. Still picture will appear on the TV screen. If a still picture vibrates vertically, stabilize it using v/V on the remote control. If the DVD+VCR is left in the STILL mode for more than 5 minutes, the DVD+VCR will automatically enter the STOP mode to protect the tape and video heads. the TV screen. It is not necessary to select the tape speed for playback. In playback, the TV/VCR selector switches to VCR mode automatically. video picture one frame at a time while viewing a still picture. 3 To return to playback, press PLAY (H). If the tape reaches the end before STOP (x) is pressed, the DVD+VCR will automatically stop, rewind and eject the tape, and it will turn itself off. Slow Motion 1 While in still mode, press FORWARD (>). The tape will be played back at a speed 1/19 times slower than the normal speed. During slow playback, use v/V on the Remote Control to minimize noise bands. If slow motion mode continues for more than 3 minutes, the DVD+VCR will automatically change to playback mode. Tracking Control Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. [. . . ] Repaired or Replacement Units are warranted for the remaining period of the original warranty. HOW SERVICE IS HANDLED: Call 1-800-984-9349 for instructions on getting the defective unit repaired or replaced. Please retain dated sales receipt and your box to return the unit to Zenith for repair or replacement. Both ways shipping charges will be borne by Zenith during the Warranty Period. [. . . ]