User manual ZENITH XBV322 OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | XBV322 | DVD Player + Video Cassette Recorder © Copyright 2003, Zenith Electronics Corporation. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output 5. 1 Speaker Setup Others 8 7 6 5 4 3 2 1 Unlock Change Enter the code of a country whose standards were used to rate the DVD video disc, referring to the list (See "Country Code List", page 37. ). Disc Audio Disc Subtitle Disc Menu Rating Country Code TV Aspect Menu Language Digital Audio Output 5. 1 Speaker Setup Others Code Set US V Select Rating 1 buttons. 3 Whenayou havepersonalusingathe numbered butEnter 4-digit password tons to create a 4-digit security password, then press SELECT/ENTER. When you have already entered a password; Enter a 4-digit password using the numerical buttons to confirm the personal 4-digit security password, then press SELECT/ENTER. If you make a mistake before pressing SELECT/ENTER, press CLEAR and enter 4-digit security password again. Select 1 buttonsthe Country Code option using the v/V on the setup menu. 5 Press 2 to shift to second character and select the second character using v/V buttons. SELECT/ENTER to confirm Country 6 Press selection, then press SETUPyourexit the Code to menu. ote Confirmation of the 4-digit password is necessary when the password is changed (see Changing the 4-digit password below ). Changing the 4-digit password 1 Follow Steps 1-2 as shown above to the left (Rating). 5 Enter exactly the same password a second time and verify by pressing SELECT/ENTER. If you set a rating for the DVD+VCR, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. You must enter the 4-digit password or change the rating level in order to play the disc. to confirm your 5 Press SELECT/ENTERSETUP to exit therating selection, then press menu. If you forget your 4-digit password If you forget your password, to clear the current password follow the procedure below. 2 Enter the 6-digit number 210499. The 4-digit password is cleared. 3 Enter a new password as shown above to the left (Rating). 20 Tape Operation Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV's source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV's source selector to VIDEO. Set the Output Source to VCR as shown in "Selecting the Output Source" on page 6. Search This function lets you quickly and visually search for a desired tape section in either direction: forward or reverse. The DVD+VCR will be activated in the SEARCH mode. If the DVD+VCR is left in the SEARCH mode for more than 3 minutes, the DVD+VCR will automatically enter the PLAY mode, to protect the tape and video heads. 1 Insert a prerecorded video cassette. The indicator will light and the DVD+VCR will power-up automatically. If a tape without a safety tab is inserted, the unit will start playback automatically. 2 To return to playback, press PLAY (H). Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP (X) during playback. Still picture will appear on the TV screen. If a still picture vibrates vertically, stabilize it using v/V on the remote control. If the DVD+VCR is left in the STILL mode for more than 5 minutes, the DVD+VCR will automatically enter the STOP mode to protect the tape and video heads. In playback, the TV/VCR selector switches to VCR mode automatically. Press STOP (x) 3 STOP appearsxonto stop playback. the TV screen. If the tape reaches the end before STOP (x) is pressed, the DVD+VCR will automatically stop, rewind and eject the tape, and it will turn itself off. video picture one frame at a time while viewing a still picture. 3 To return to playback, press PLAY (H). Slow Motion 1 While in still mode, press FORWARD (>). [. . . ] Semiconductor laser, wavelength 650 nm DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz CD: 8 Hz to 20 kHz More than 100dB (ANALOG OUT jacks only) Less than 0. 008% More than 95 dB (DVD/CD) 38 Notes 39 ZENITH ELECTRONICS CORPORATION DVD/VCR XBV322 LIMITED WARRANTY-USA Zenith will repair or replace your product, at Zenith's option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U. S. Repaired or Replacement Unit is warranted for the remaining period of the original warranty. Call 1-877-993-6484 for instructions on getting the defective unit repaired. [. . . ]