User manual ZENITH XBS245 OPERATING GUIDE

[. . . ] Installation and Operating Guide | Warranty Model Number | XBS245 | DVD/VCR/Radio Combination Home Theater System © Copyright 2002, Zenith Electronics Corporation Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] Press MENU to return to the TV screen. AUDIO OUTPUT (STEREO/LEFT/RIGHT) Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF. OUT. This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels. AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by using b/B. 2 3 20 Before Operation - VCR Mode (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. Manual Clock Set Example: July 5, 2002 ; 2:15 AM Things to know before starting The clock uses the 12-hour system. (Be sure to set AM and PM correctly. ) The initial Clock Setting is JANUARY 1, 2002, 12:00 AM. 1 Press MENU and the MAIN menu will appear. the and the SET CLOCK Press SELECT/ENTER menu will SET CLOCK TIMER RECORD CHANNEL SETUP MONTH : JANUARY DAY : 1 TUE YEAR : 2002 TIME : 12 : 00 AM AUTO CLOCK SET: ON PBS CH. : 2 TV Auto Clock Set The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. VCR SETUP SELECT ENTER TO EXIT PRESS SELECT ADJUST TO EXIT PRESS The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. 3 Use b/B to choose the month. Use b/B The day of the week will display automatically. 1 Use v/V choose SET CLOCK menu. the and the SET CLOCK SELECT/ENTER menu SET CLOCK TIMER RECORD CHANNEL SETUP VCR SETUP SELECT ENTER TO EXIT PRESS MONTH : JANUARY DAY : 1 TUE YEAR : 2002 TIME : 12 : 00 AM AUTO CLOCK SET: ON PBS CH. : 2 TV Press MENU and the MAIN menu will appear. choose the YEAR 5 Use V to to choose the year. option. Use b/B 7 Press MENU when finished. SELECT ADJUST TO EXIT PRESS choose the AUTO 3 Use V to to choose ON. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. ote If setting the clock manually, "AUTO CLOCK SET" must set to "OFF". If set to "ON", an incorrect date and/or time will be entered again when the DVD+VCR is turned off. choose the PBS CH. Use b/B 5 Press MENU when finished. ote There are cases where the TV station does not send, or sends wrong date and/or time information and the DVD+VCR sets the incorrect time. If this happens, we recommend that you set the clock manually. 21 PREPARATION Before Operation - DVD Mode Caution: Before using the remote control, press DVD to select the operation mode to DVD. The buttons can be also be used for setting numbers (e. g. , title number). For some functions, press SELECT/ENTER to execute the setting. General Explanation This manual gives basic instructions for operating the DVD+VCR. Some DVDs require specific operation or allow only limited operation during playback. [. . . ] No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). The remote control is not pointed at the remote sensor of the DVD+VCR. There is an obstacle in the path of the remote control and the DVD+VCR. Tune in the station manually. Preset the stations (page 37). Select OPTICAL by pressing AUX. [. . . ]