User manual ZENITH IQDVD2300 OPERATING GUIDE

[. . . ] machine numbers | IQDVD2300C As an ENERGY STAR® Partner, Zenith Electronics Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. operating guide PAGE 2 INTRODUCTION Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: ATTENTION: CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] Notes r r r r Refer to the owner's manual of your receiver as well. When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. Be sure to adjust the receiver's volume to a moderate listening level. Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be damaged. BASIC OPERATION PAGE 19 Basic Playback This section shows you the basics on how to play back a DVD video disc. DIGITAL AUDIO slow/scan rev power open/close pause/step menu select/enter play stop skip 3 1 4 pause /step power dvd vcr catv tv Preparations q When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD player. q When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the input source connected to the DVD player. q Set the playback picture size according to the aspect ratio of the connected TV. q If you do not have the necessary equipment to enjoy Dolby Digital (AC-3) sound, set the Digital Audio Output at the SETUP menu to "PCM". fwd play 1 skip Press POWER. The DVD player turns on and the power indicator goes on. skip stop select/ enter open/close ch vol resume 2 q q 2 Press OPEN/CLOSE. The disc tray opens. You can open the disc tray by pressing this button even if the DVD player is turned off. vol ch display return/tv input 1 4 7 clear 2 5 8 0 3 sound/mute 3 6 program Place a disc on the disc tray with the playback side down. If the disc is placed in upside down (and it is a single sided disc), the DVD display will indicate "NO DISC" or "DISC ERROR". If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place anything except 3" discs or 5" discs on the disc tray. 9 title menu q angle marker-search audio subtitle setup repeat a-b random zoom q slow/scan rev fwd 4 Press PLAY. The disc tray is automatically closed and playback begins. TITLE CHP / TRK DVD playback indicator q If you insert an audio CD, the CD indicator lights up in the DVD display. After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen. q TITLE 1 TITLE 2 When a menu screen appears on the TV screen. In case of interactive DVDs with control, a menu screen appears on the TV screen. Perform step 5 on page 20 to start play. TITLE 3 TITLE 4 Example of interactive DVD On-Screen Menu PAGE 20 BASIC OPERATION Basic Playback DIGITAL AUDIO 5 Press D/E/F/G and press SELECT/ENTER, or press the numeric button(s), to select the desired item. 1 2 TITLE 1 TITLE 2 power dvd vcr catv tv 3 4 play skip stop skip TITLE 3 TITLE 4 Play of the selected item now begins. q 5 pause /step select/ enter open/close For further info, also refer to the jacket or case of the disc you are playing. ch vol resume vol ch 5 display return/tv input 1 4 7 clear 2 5 8 0 3 sound/mute After operation When the unit is not in use, remove the disc and press POWER to turn off the power. 6 program 9 title menu Notes r Do not move the DVD player during playback. Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push up the disc tray or put any objects other than discs on the disc tray. Be especially careful with children's fingers around the closing disc tray as there is a risk of personal injury. When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing. Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing. audio subtitle angle marker-search setup repeat a-b random zoom r slow/scan rev fwd r r r r BASIC OPERATION PAGE 21 Basic Playback Stopping Play Press STOP during playback. For your convenience DIGITAL AUDIO power dvd vcr catv tv play PLAY skip REV SKIP STOP PAUSE/ STEP RESUME pause /step skip stop select/ enter FWD SKIP open/close q When play is stopped, the unit records the point where STOP was pressed (RESUME function). When the tray is opened or PLAY is pressed again, the RESUME function will be cleared. The RESUME function works only with discs for which the elapsed playing time appears on the window display during playback. [. . . ] (Video CD, CD-ROM, CD-Extra, CD-G, photo CD, and CD-i discs can not be played on this DVD player. ) This DVD player uses the NTSC color system, and cannot play back DVD video discs recorded in any other color system (PAL, SECAM, etc. ) "Certain audio features of this product manufactured under a license from Desper Products, Inc. , Spatializer® 3-D Stereo, Spatializer N-2-2 (TM) and the circle-in-square device are trademarks owned by Desper Products, Inc, . " Region Management Information Region Management Information: This DVD/CD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD/CD player, this DVD/CD player cannot play that disc. The Region number of this DVD/CD player is 1. 1 Notes on Unauthorized Discs You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business purposes. When you try to play back an unauthorized disc, "Check Regional Code" appears on the TV screen. Notes on Copyright It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs will be distorted. [. . . ]