Detailed instructions for use are in the User's Guide.
[. . . ] machine number
|
DVD5591
ENJOY
THE
VIEW
®
operating
guide / warranty
PAGE 2
INTRODUCTION
Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] This player does not memorize if you switch off the player when a DVD or title menu appears on the TV screen. The last scene memory function will be cleared when the STOP is pressed in the STOP mode.
slow/scan rev fwd
Screen Saver
The screen saver is useful to prevent your display from becoming damaged. The screen saver picture appears when you leave the DVD player in stop mode for about 5 minutes. Automatic power off function After the Screen Saver has been engaged for about 5 minutes, the DVD player will automatically turn itself off. Screen Saver
BASIC OPERATION
PAGE 23
Basic Playback (Cont'd)
disc skip
Exchanging Discs during Playback
skip scan pause step stop play
disc select
disc exchange
power
1
open / close
Press DISC EXCHANGE during playback to open the loading drawer. Press DISC SKIP to rotate the disc tray to the desired position.
The carousel will advance clockwise by one disc tray. Note: The disc tray which was in the play position can not be exchanged.
2
DISC SKIP DISC EXCHANGE
3
Exchange the discs and press DISC EXCHANGE or OPEN/CLOSE to close the loading drawer.
Skipping Discs
power
dvd vcr catv tv
open / close
display
title ch
menu return tv input
OPEN/ CLOSE
Press DISC SKIP during playback or in the stop mode. q Each time the button is pressed, the next disc tray is selected.
DVD TITLE CHP/TRK
vol
select / enter
vol
s
ound /m
2 3
1 4
5
marke
r
sea
ch
zo
u te
om
rch
skip
pa use/step
skip
2 3
1 4
5
play
stop
PLAY Notes
When the DISC SKIP is pressed during playback or in the stop mode, the disc tray advances to the next disc. If there is no disc on the selected disc tray, the disc tray of the next number will be selected.
setup repeat clear
subtitle a-b disc skip
audio random
program angle
DISC SKIP
slow/scan rev fwd
Exchanging the Disc and Starting Playback
1
Press OPEN/CLOSE during playback or in the stop mode.
Play is stopped (if pressed during playback), the loading drawer opens and the disc tray which was in the play position comes to the center position.
2
Exchange the disc in the center position.
Center position
3
Press OPEN/CLOSE or PLAY again.
The loading drawer closes, the disc tray returns to the play position and playback begins from the new disc.
PAGE 24
BASIC OPERATION
Special Playback Still Picture (Pause)
Press PAUSE/STEP during playback.
q
power
dvd vcr catv tv
open / close
DVD The player will be placed in the still picture mode. q CD The player will be placed in the pause mode.
display
title ch
menu return tv input vol
s
ound /m
Frame Advance (DVD only)
Press PAUSE/STEP during still playback.
PAUSE/ STEP (Each time you press PAUSE/STEP, the picture advances one frame)
vol
select / enter
marke
r
sea
ch
zo
u te
om
rch
skip
pa use/step
SKIP STOP
play
stop
skip
SKIP PLAY
To resume normal playback, press PLAY.
Skipping chapters and tracks forward or back
Skipping forward Press SKIP during playback.
A chapter (DVD) or a track (CD) is skipped each time the button is pressed.
setup repeat clear
subtitle a-b disc skip
audio random
program angle
slow/scan rev fwd
Skipping back Press SKIP during playback.
q When the button is pressed once midway through a chapter/track, the player returns to the start of that chapter/track. When it is pressed again, a chapter/track is skipped each time the button is pressed.
HDCD Playback
HDCD is a process that increases the fidelity of both specially encoded HDCD discs and standard CD audio discs. When an HDCD-encoded disc is playing, the special decoder is automatically activated and the HDCD Indicator lights. To enjoy the benefits of HDCD, your DVD Player must be connected to your A/V receiver via the Analog Audio Outputs. However, if your A/V receiver or surround processor is equipped with built-in HDCD decoding, you may also use a Coaxial or Optical digital audio connection so that the HDCD processing is done there.
BASIC OPERATION
PAGE 25
Special Playback (Cont'd)
You can play back discs at various speeds.
To Scan at fast forward or fast reverse playback.
power
dvd vcr catv tv
open / close
Press and hold SKIP or button for about two seconds during playback.
[TV screen]
FF X2 GG X2
display
title ch
menu return tv input vol
s
ound /m
vol
select / enter
marke
r
sea
ch
zo
u te
om
rch
skip
pa use/step
SKIP
play
stop
skip
SKIP PLAY
q The speed of advance (reverse) is relatively slow at first. (Each time the button is pressed, the speed increases up to 4 steps (DVD) or 3 step (CD). ) q The speed will be retained even after the button is released.
setup repeat clear
subtitle a-b disc skip
audio random
program angle
To return to normal playback, press PLAY.
Note
The DVD player does not play back sound during the high speed reverse and forward playback of DVD video discs. However, the DVD player plays back sound during fast forward or fast reverse playback of audio CDs.
slow/scan rev fwd
PAGE 26
BASIC OPERATION
Various speed playback with Shuttle Ring
You can play back discs at various speeds, and resume normal playback.
To play in slow-motion
During still picture mode, rotating and holding the SHUTTLE ring to the positions indicated gives those slow modes.
power
dvd vcr catv tv
open / close
q The variable-speed slow picture will appear on the TV screen.
display
title ch
menu return tv input vol
s
ound /m
Release the SHUTTLE ring to resume the still picture mode.
1/16 1/8 1/16 1/8
vol
select / enter
marke
r
sea
ch
zo
u te
om
rch
skip
pa use/step
skip
PAUSE/ STEP PLAY
1/2 REVERSE DIRECTION
1/4
1/4
play
stop
1/2
FORWARD DIRECTION
setup repeat clear
subtitle a-b disc skip
audio random
program angle
To scan at fast forward or fast reverse.
slow/scan rev fwd
During playback mode, rotating and holding the SHUTTLE ring to the positions indicated gives those fast search modes.
q The variable-speed search picture will appear on the TV screen.
SLOW/SCAN Shuttle ring
Release the SHUTTLE ring to resume normal playback.
G FF X2 GG X2
FF X4
GG X4
Notes
The DVD player does not play back sound during slow-motion playback, the high speed reverse and forward playback of DVD video discs. However, the DVD player plays back sound during fast forward or fast reverse playback of audio CDs. The DVD player provides four (4) scan speeds (DVD) and three (3) scan speeds (CD). The DVD player can not play back audio CDs in slow motion.
FF X16
GG X16
FF X100
GG X100
REVERSE DIRECTION
FORWARD DIRECTION
OPERATION USING GUI MENU ICONS
PAGE 27
General Information about GUI menu icons
This unit features GUI Menu Icons showing disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc. ). Other icons allow the settings to be changed.
Common procedures
1
Press DISPLAY during playback.
q Title function can be accessed from the stop mode.
2
power
dvd vcr catv tv
Press D/E to select the desired item.
open / close
1
display
title ch
menu return tv input vol
s
ound /m
q The current selected item is indicated by a yellow frame on its GUI menu icons.
vol
select / enter
marke
r
sea
ch
zo
2, 3
3
Press F/G to select the desired setting.
u te
om
rch
skip
pa use/step
skip
play
stop
q When numbers are displayed (e. g. title number), the numeric buttons can also be used for setting instead of F/G. q For some functions, the setting will be registered immediately; for others, SELECT/ENTER must be pressed.
setup repeat clear
subtitle a-b disc skip
audio random
program angle
To clear the GUI Menu Icons, press DISPLAY again.
Examples of GUI Menu Icons. [. . . ] The DVD player does not start playback.
· The disc is dirty. · No disc is inserted.
· An unplayable disc is inserted. · The remote control is not pointed at the remote sensor of the DVD player. · There is an obstacle in the path of the remote control and the DVD player. [. . . ]