Detailed instructions for use are in the User's Guide.
[. . . ] DVD PLAYER
OWNER'S MANUAL
MODEL : DVD-3030N
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
PAGE 2
INTRODUCTION
Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVERTISSEMENT
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: CAUTION: ATTENTION: CAUTION:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. [. . . ] If you leave the receiver power on, the speakers may be damaged.
CONNECTIONS
PAGE 15
Connecting to Optional Audio System Enjoying Dolby Pro Logic Surround Sound
Dolby Pro Logic Surround You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital decoding. Refer to the following connection diagram.
DIGITAL OUT
AUDIO OUT2
COMPONENT VIDEO OUT
AUDIO OUT1
COAXIAL
DIGITAL OUT
L
Pb
L
R
Pr
R
OPTICAL
S-VIDEO OUT
Y
VIDEO OUT
Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.
To VIDEO OUT
To AUDIO OUT
Video cable
Audio cable
Connection example
Receiver equipped with Dolby Pro Logic Surround
To audio input
To video input Front speaker (left) TV
Center speaker Front speaker (right)
Rear speaker (left)
Rear speaker (right)
q
With a receiver equipped with Dolby Digital Connect the equipment the same way as described in "Enjoying Dolby Digital Sound" on the previous page. Refer to that receiver's owner's manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. (Refer to "Selecting Digital Audio Output" on page 36. )
PAGE 16
CONNECTIONS
Connecting to Optional Audio System Enjoying 2 Channel Digital Stereo Sound
2 Channel Digital Stereo You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).
Connection example
75 ohm coaxial cable or optical cable To digital audio input To S-video Input or Video Input To DIGITAL OUT (COAXIAL or OPTICAL) S-Video cable or Video cable Front speaker (left)
Receiver equipped with a digital audio input
Front speaker (right)
DIGITAL OUT
AUDIO OUT2
COMPONENT VIDEO OUT
AUDIO OUT1
TV
COAXIAL
DIGITAL OUT
L
Pb
L
R
Pr
R
OPTICAL
S-VIDEO OUT
Y
VIDEO OUT
Enjoying DTS Sound
Introducing DTS Digital SurroundTM. . . the finest technology ever invented to transform existing "home theater" systems into six discrete channels of exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the only 5. 1 surround sound format that can deliver this revolutionary 3-dimensional experience through new music recordings on compact discs, original 5. 1 soundtracks on motion picture laserdiscs, and soon, a wide variety of products on DVD.
75 ohm coaxial cable or Optical Cable
Receiver equipped with a DTS decoder
To digital audio input
Connection example
To S-video Input or Video Input To DIGITAL OUT (COAXIAL or OPTICAL) S-Video cable or Video cable To S-VIDEO OUT or VIDEO OUT
DIGITAL OUT
Front speaker (left)
Front speaker (right) Center speaker
AUDIO OUT2
COMPONENT VIDEO OUT
AUDIO OUT1
COAXIAL
DIGITAL OUT
L
Pb
L
Sub woofer Rear speaker (left surround) Rear speaker (right surround)
R
Pr
R
OPTICAL
S-VIDEO OUT
Y
VIDEO OUT
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. Notes
Refer to the owner's manual of your receiver as well. When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. Be sure to adjust the receiver's volume to a moderate listening level. Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may be damaged.
BASIC OPERATION
PAGE 17
Basic Playback
This section shows you the basics on how to play back a DVD video disc. Preparations q When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD player. q When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the input source connected to the DVD player. q Set the playback picture size according to the aspect ratio of the connected TV at the SETUP menu (TV Aspect). q If you do not have the necessary equipment to enjoy Dolby Digital sound, set the Digital Audio Output at the SETUP menu to "PCM".
MENU SEARCH POWER/STANDBY OPEN/ CLOSE PLAY PAUSE/STEP STOP SELECT/ ENTER
SKIP/SCAN
MENU
3 1
POWER
OPEN/CLOSE
SETUP
TITLE
MENU
2
q
1
Press POWER.
The DVD player turns on and the power indicator light is changed to a green color.
ZOOM
MARKER
SEARCH
I GUPLAY S DI
RET U
RN
2
Press OPEN/CLOSE.
The disc tray opens.
You can open the disc tray by pressing this button even if the DVD player is in standby mode.
SELECT/ ENTER
3
4
STOP
PLAY
PAUSE/STEP
Place a disc on the disc tray with the playback side down.
There are two different disc sizes. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place anything except 3" discs or 5" discs on the disc tray.
q
SCAN
SLOW
SKIP
q
4
CLEAR 3D SOUND
Press PLAY.
The disc tray is automatically closed and playback begins.
If the disc is placed in upside down (and it is a single sided disc), "NO DISC" or "DISC ERROR" appears on the TV screen.
CD DVD TITLE CHP/TRK PROG. RANDOM ALL A B
q
AUDIO SUBTITLE REPEAT PROGRAM ANGLE A-B RANDOM
Operating status indicator q q
If you insert an audio CD, the CD indicator lights up in the DVD display. After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen.
When a menu screen appears on the TV screen.
In case of interactive DVDs with control, a menu screen appears on the TV screen. Perform step 5 on page 18 to start play.
Example of interactive DVD On-Screen Menu
PAGE 18
BASIC OPERATION
Basic Playback
5
Press D/E/F/G and press SELECT/ENTER, or press the numeric button(s), to select the desired item. 1 2 3 4
OR
POWER
OPEN/CLOSE
Play of the selected item now begins.
q
SETUP
TITLE
MENU
ZOOM
MARKER
SEARCH
For further information, also refer to the jacket or case of the disc you are playing.
I GUPLAY S DI
RET U
RN
SELECT/ ENTER
5
PAUSE/STEP
After operation When the unit is not in use, remove the disc and press POWER to turn off the power.
Notes
STOP PLAY
SCAN
SKIP
SLOW
CLEAR
3D SOUND
AUDIO
SUBTITLE REPEAT PROGRAM
ANGLE A-B RANDOM
Do not move the DVD player during playback. Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. [. . . ] (CD-R, CD-RW, Video CD, CD-ROM, CD-Extra, CD-G, photo CD, and CD-i discs can not be played on this DVD player. ) This DVD player uses the NTSC color system, and cannot play back DVD video discs recorded in any other color system (PAL, SECAM, etc. ) "Certain audio features of this product manufactured under a license from Desper Products, Inc. , Spatializer® 3-D Stereo, Spatializer N-2-2 (TM) and the circle-in-square device are trademarks owned by Desper Products, Inc, . "
Region Management Information
Region Management Information: This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc.
The Region number of this DVD player is 4.
4
Notes on Unauthorized Discs
You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business purposes. When you try to play back an unauthorized disc, "Check Regional Code" appears on the TV screen.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs will be distorted. [. . . ]