User manual YAESU FTM-10R

[. . . ] VHF/UHF DUAL BAND FM TRANSCEIVER FTM-10R OPERATING MANUAL VERTEX STANDARD CO. , LTD. VERTEX STANDARD 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan US Headquarters 10900 Walker Street, Cypress, CA 90630, U. S. A. YAESU EUROPE B. V. Box 75525, 1118 ZN Schiphol, The Netherlands Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U. K. VERTEX STANDARD HK LTD. Unit 5, 20/F. , Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VERTEX STANDARD (AUSTRALIA) PTY. , LTD. Normanby Business Park, Unit 14/45 Normanby Road Notting Hill 3168, Victoria, Australia Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Menu ("Set") Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Interval Timer (and Stop Watch Timer) is designed to Start and Stop repeatedly whenever you press the key. The LED at the left of the DIAL knob blinks yellow while the Interval Timer is counting. Press and hold the key for one second to reset both the Interval Timer and Stop Watch Timer. FTM-10R OPERATING MANUAL 55 CONVENIENCE FEATURES MUTE FEATURE Press and hold the [VOL/SEL] key for one second to mute the receiver audio volume temporarily, without touching the volume (DIAL) knob. (The FTM-10R will shift to the Menu mode) To disable the MUTE feature, press the [VOL/SEL] key momentarily. LOCK Press the [POWER] key momentarily while the transceiver is turned on, the key lockout feature is activated, to prevent accidental frequency change. The "UNLOCK" notation appears on the display for one second. You may also lock out the PTT key when the LOCK mode is activated via the Menu Item "F22 PTT LOCK". See page 87. AUTOMATIC AUDIO VOLUME CONTROLLER The FTM-10R includes an Automatic Audio Volume Controller to allow the most comfortable and/or effective reception in noisy environments. Press and hold the [VOL/SEL] key for one second to activate the Menu mode. ON MIN: Activates the Automatic Audio Volume Controller with the low effect level. ON MID: Activates the Automatic Audio Volume Controller with the medium effect level. ON MAX: Activates the Automatic Audio Volume Controller with the high effect level. Press the [VOL/SEL] key to save the new setting and exit to normal operation. 56 FTM-10R OPERATING MANUAL CONVENIENCE FEATURES AF-VFO FEATURE By default, the volume control (DIAL knob) and Clock display do not return to the frequency control automatically when you leave an interval of approximately three seconds. You may change the status of the DIAL knob so that the display will return automatically to the Frequency select dial function and Frequency display. Press and hold the [VOL/SEL] key for one second to activate the Menu mode. TOGGLE: Keeps the DIAL knob function and display until the [VOL/SEL] key is pressed once again. AUTOBACK: The DIAL knob function and display comes back to frequency selection and frequency display approximately three seconds after. Press the [VOL/SEL] key to save the new setting and exit to normal operation. VOX OPERATION The VOX system provides automatic transmit/receive switching based on voice input to the microphone. With the VOX system enabled, you do not need to press the PTT key in order to transmit. Press and hold the [VOL/SEL] key for one second to activate the Menu mode. Rotate the DIAL knob to select the one of the following microphone functions. R-HAND: Enable the VOX operation for the microphone which is connected to the rear panel MIC Jack. F-HAND: Enable the VOX operation for the microphone which is connected to the front panel MIC Jack. [. . . ] Rotate the DIAL knob to one of the following Reset Menu items: SF1 COPY ALL: Transfer all memories and other settings from a transceiver to another FTM-10R. SF2 COPY MSG: Transfer all messages from a transceiver to another FTM-10R. SF4 RSET SYS: Resets the Menu Item settings to their factory defaults. (Except F16 ID LIST, F17 ID REG, F18 MESSAGE, F25 RPT MODE, F26 RPT SFT, F28 RX F CCL, F36 SQL DCS, F39 SQL TSQF, F40 SQL TYPE, and F44 TX POWER) SF5 RSET ALL: Clears all memories and other settings to factory defaults. [. . . ]