User manual X10 IR19A

[. . . ] IconRemote (Dual User) TM Owner's Manual Model IR19A Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Introduction Congratulations on your purchase of this Universal Remote Control. [. . . ] 8 9 Setting Favorites The Favorites feature is what really sets this remote apart from other remotes. It lets you go to your favorite channel(s) by simply pressing a button next to a sticker (or label) that represents that favorite channel. Flip the switch on the back of the remote to either position (in this case, we'll call this position User 1). Press and hold SETUP until the indicator remains on, then release SETUP. Repeatedly press SELECT to select the desired mode (TV, VCR, etc. ), unless the desired device is already selected. Note: You can use up to 5 buttons, including 0 through 9, OK, and - to enter your favorite channel: 550, 472Enter, 162OK, 5-7, etc. , are examples. Attach the sticker that represents the favorite channel you set up above to the location next to that FAVORITE button. 11, we've used an ABC sticker. ) Follow Steps 1 through 7 to set up more favorites, each time selecting a different FAVORITE button in Step 4, and entering a different channel number in Step 5. Then place the appropriate sticker next to the FAVORITE button, as in Step 7. Press and hold SETUP until the indicator remains on, then release SETUP. Press and hold MUTE until the indicator blinks off, then release the button. Press and release SELECT to select the desired mode (TV, VCR, etc. ) for Volume/Mute control; the indicator blinks, then stays on. Note: The indicator will blink rapidly for 3 seconds if the mode you have selected does not have Volume/ Mute control. All other modes will now "punch-through" to your chosen mode for Volume/Mute control. VCR/DVD/DVR Punch-Through Feature This remote allows the 6 VCR buttons (PLAY, PAUSE, STOP, SCAN+, SCAN-, and REC) to "punch-through" (transmit or hand-over) control from any mode programmed with TV or Cable codes to the last VCR, DVD, or DVR mode used. For example, if you have 2 DVD, VCR, or DVR devices programmed into this remote, the last device you used controls the 6 VCR buttons. Note: This feature will not operate if the programmed TV, SAT or Cable code has its own VCR transport button control e. g. a TV Combo, SAT/PVR, etc. Setting Any Mode to Use its Own Volume/ Mute Control You can set any mode to use only its own Volume/Mute control. Note: If your chosen mode does not have Volume/Mute functions, then this remote's VOLUME and MUTE will not operate. Press and hold SETUP until the indicator remains on, then release SETUP. Press and hold MUTE until the indicator blinks off, then release the button. Press and release SELECT to select the desired mode (TV, VCR, etc. ); the indicator blinks, then stays on. Press and release VOLUME- (down); the indicator blinks, then stays on. [. . . ] Press and hold SETUP until the indicator remains on, then release SETUP. Repeatedly press and release SELECT to select the desired mode (TV, VCR, etc. ). Press and release the button that you want to learn (for instance, POWER). Point your original remote at the bottom of your new remote until they are about 1 inch apart. [. . . ]