User manual X10 CR13A

[. . . ] Installation and operating instructions for Remote Control with 16 Camera Scanning Feature, Model CR13A The CR13A Remote Control sends Wireless Radio Frequency (RF) signals to any X10 Transceiver (RR501 or TM751, etc. ). [. . . ] Pressing any number (in the group, 1 thru 4) turns that camera on and the other three cameras (in the group) off. Each press of either the black UP (or DOWN) button will turn on the next (or previous) camera in the group, while turning the current camera off. (You set all cameras to the same channel as the Video Receiver connected to your TV (Channel A, B, C, D). If you press any number that is NOT in the group (1-4) all 4 cameras turn off. To change the size of the group of cameras you want to control press that number button (e. g. 6) and hold it pressedwhile you flip the switch to the right (Program) and then back to the left (Normal). The red LED blinks to indicate that you have now set buttons 1 thru 6 to control cameras 1-6. Note, if you set a group larger than 4 you will notice a slight pause between each group of 4 cameras when scanning. [. . . ] For help or more information on setup, please visit: http://www. x10. com/support CR13A-12/02 [. . . ]