User manual WHIRLPOOL WA PURE 22 TDI B INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WA PURE 22 TDI B. We hope that this WHIRLPOOL WA PURE 22 TDI B user guide will be useful to you.


WHIRLPOOL WA PURE 22 TDI B INSTRUCTION FOR USE: Download the complete user guide (595 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WA PURE 22 TDI B KURZANLEITUNG (235 ko)
   WHIRLPOOL WA PURE 22 TDI B MODE D'EMPLOI (565 ko)
   WHIRLPOOL WA PURE 22 TDI B GEBRUIKSAANWIJZING (559 ko)
   WHIRLPOOL WA PURE 22 TDI B BEDIENUNGSANLEITUNG (566 ko)
   WHIRLPOOL WA PURE 22 TDI B INSTRUZIONI PER L'USO (559 ko)
   WHIRLPOOL WA PURE 22 TDI B PROGRAM CHART (230 ko)

Manual abstract: user guide WHIRLPOOL WA PURE 22 TDI BINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] CONTENTS BEFORE USING THE WASHING MACHINE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE DOOR CHILD SAFETY (IF AVAILABLE) BEFORE THE FIRST WASH CYCLE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES REMOVING THE FILTER DRAINING RESIDUAL WATER CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE ACCESSORIES TRANSPORT / HANDLING ELECTRICAL CONNECTION BEFORE USING THE WASHING MACHINE 1. Removing the packaging and inspection • After unpacking, make sure that the washing machine is undamaged. • Keep the packaging materials (plastic bags, polystyrene parts, etc. ) out of reach of children, as they are potentially dangerous. 5. Drain • Connect the drain hose to the siphon or hook it over the edge of a sink by means of the “U” bend supplied. • If the washing machine is connected to an integrated drainage system, ensure the latter is equipped with a vent to avoid simultaneous loading and draining of water (siphoning effect). 6. Electrical connection • Electrical connections must be carried out by a qualified technician in compliance with the manufacturer’s instructions and current standard safety regulations. • Data regarding voltage, power consumption and protection requirements is given on the inside of the door. [. . . ] Place its hooks on the upper end of the back guide rails and slightly push the separator down to fix it (fig. A gap should remain between the separator and the bottom of the main wash chamber, if the separator has been correctly installed (fig. For use with liquid detergent: place the separator in the lower position. Position the separator so that it touches the bottom of the main wash chamber (fig. “D”). 1 C 1 D 23 Notes: • Keep detergents and additives in a safe, dry place out of the reach of children. However, in this case a powder detergent must be used for the main wash. • Do not use liquid detergents when activating the “Start Delay” function (if available on your washing machine). • To prevent dispensing problems when using highly concentrated powder and liquid detergents, use the special detergent ball or bag supplied with the detergent and place it directly inside the drum. Slowly turn the filter counterclockwise until the water begins to drain out. 1 litre of water into the detergent drawer to reactivate the “Eco system”. 25 CARE AND MAINTENANCE Appliance exterior and control panel • Can be washed down with a soft, damp cloth. • Dry with a soft cloth. Door seal • Clean with a damp cloth when necessary. • Check the condition of the door seal periodically. Filter • Check and clean the filter regularly, at least two or three times a year (see “Removing the filter”). Do not use flammable fluids for cleaning the appliance. Detergent dispenser 1. Press the release lever in the main wash compartment downward and remove the drawer (fig. Remove the separator from the main wash compartment by pulling it upward (fig. Refit the separator and the grid in the detergent drawer and fit the drawer back inside its housing. A B 26 Water supply hose Check the supply hose regularly for brittleness and cracks and replace it if necessary using a new hose of the same type (available from After-Sales Service or specialist dealer). “C”), periodically check the colour of the transparent coating. If the coating begins to turn red, this is an indication that the hose may have a leak and should be replaced. Contact our After-Sales Service team or specialist dealer to obtain a replacement hose. A Mesh filter for water connection Check and clean regularly. For washing machines with an inlet hose as shown on pictures “A”, “B” or “C” (depending on the model): 1. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. [. . . ] If failure code “FA” appears on the display: Switch the appliance off, pull out the mains plug and turn the water tap off. Tilt the appliance forward carefully to allow the collected water to flow out from the bottom of the appliance. turn the water tap on (if water immediately flows into the appliance again, without the appliance being started, there is a failure. If the failure occurs again, unplug the appliance and contact our After Sales Service (see “After Sales Service”). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WA PURE 22 TDI B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WA PURE 22 TDI B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.