User manual WHIRLPOOL UXT4236AYS INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL UXT4236AYS. We hope that this WHIRLPOOL UXT4236AYS user guide will be useful to you.


WHIRLPOOL UXT4236AYS INSTALLATION GUIDE: Download the complete user guide (1184 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL UXT4236AYS (1184 ko)
   WHIRLPOOL UXT4236AYS (1184 ko)
   WHIRLPOOL UXT4236AYS DIMENSION GUIDE (127 ko)

Manual abstract: user guide WHIRLPOOL UXT4236AYSINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] 4 CM) RANGE HOOD Installation Instructions and Use & Care Guide For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. 31 RANGE HOOD SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. This symbol alerts you to potential hazards that can kill or hurt you and others. [. . . ] Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent. Depending on your model, determine which venting method to use: roof, wall or non-vented (recirculating). Mark a line distance “A” from the right of the centerline on the underside of the cabinet. Mark the point on this line that is ⁷ 2 cm) diameter hole through the cabinet at this point. Mark a line distance “A” from the right of the centerline on the underside of the wall. 1 cm) from the back wall on the centerline of the underside of cabinet. 3 cm) to the right and left of the centerline on the underside of cabinet. 3 cm) *From wall, not cabinet frame Cabinet cutouts *¹⁄₂" (1. 3 cm) To make a circular vent opening on the underside of the cabinet top: 1. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0. 3 cm) *From wall, not cabinet frame Wall Venting To make a 3½" x 10½" (8. 8 cm) down from underside of cabinet and mark on the centerline on the back wall. Use saber or keyhole saw to cut a rectangular opening in the wall for the vent. 7 cm) Cabinet cutouts *From wall, not cabinet frame Style 3 - Cut Openings for 7" (17. 8 cm) Round Vent To make a circular vent openings on the underside of the cabinet top and bottom: 1. 7 cm) from the back wall on the underside of the top and bottom of cabinet. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0. 1 cm) from the back wall on the centerline of the underside of cabinet. For optional power supply cord kit installations, follow the instructions in the “Make Electrical Connection” section. Horizontal damper If a vent damper is installed with a wall cap with damper, check that they do not interfere with each other. Remove the power supply knockout from the top or rear of the vent hood (depending on the incoming location of your home power supply cable), and install a UL listed or CSA approved ¹⁄₂" strain relief. Feed enough electrical wire through the ½" UL listed or CSA approved strain relief to make connections in the terminal box. [. . . ] Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date is required to obtain service under this limited warranty. iTEMS EXCLUDED FROM WARRANTY This limited warranty does not cover: 1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL UXT4236AYS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL UXT4236AYS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.