User manual WHIRLPOOL HDD7000/PR0 BK INSTALLATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL HDD7000/PR0 BK. We hope that this WHIRLPOOL HDD7000/PR0 BK user guide will be useful to you.


WHIRLPOOL HDD7000/PR0 BK INSTALLATION: Download the complete user guide (294 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL HDD7000/PR0 BK INSTALACIÓN (296 ko)
   WHIRLPOOL HDD7000/PR0 BK INSTALLAZIONE (299 ko)
   WHIRLPOOL HDD7000/PR0 BK KURZANLEITUNG (298 ko)
   WHIRLPOOL HDD7000/PR0 BK CUADRO DE MANDOS (296 ko)
   WHIRLPOOL HDD7000/PR0 BK SCHEDA PROGRAMMI (299 ko)
   WHIRLPOOL HDD7000/PR0 BK TABLEAU DE PROGRAMMES (298 ko)
   WHIRLPOOL HDD7000/PR0 BK INSTRUZIONI PER L'USO (371 ko)
   WHIRLPOOL HDD7000/PR0 BK PRODUCT-INFORMATIEBLAD (296 ko)
   WHIRLPOOL HDD7000/PR0 BK LIBRO DE INSTRUCCIONES (369 ko)
   WHIRLPOOL HDD7000/PR0 BK INSTRUCTION FOR USE (370 ko)
   WHIRLPOOL HDD7000/PR0 BK PRODUCT-INFORMATIEBLAD (296 ko)

Manual abstract: user guide WHIRLPOOL HDD7000/PR0 BKINSTALLATION

Detailed instructions for use are in the User's Guide.

[. . . ] Interrupting programme: To interrupt the dryer during the drying cycle, set the programme selector knob to “Airing” “ ” and press the “Start (Pause)” button. Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the drying cycle stops automatically if you open the door. To restart, after door opening, close the door and press the “Start (Pause)” button again. [. . . ] 7 kg Mixed fabrics Extra dry Laundry which does not require ironing such as: shirts, Cupboard dry * blouses, T-shirts, sportswear. Iron dry Laundry which requires ironing such as: trousers, dresses, skirts, shirts, blouses. Synthetic, mixed fibre or cotton easy care (ironing not required) laundry Max. 3. 5 kg Laundry made from synthetic fibres such as polyamide, nylon, polyacrylic, etc. Delicate plus Cupboard dry Low drying intensity for delicates and items labelled with , such as: trousers, dresses, shirts, blouses. 2. 5 Max. 2. 5 kg - X X X X X 100’ 85’ Special programme Cupboard dry Adjusted drying intensity for jeans to reach an homogenous drying results. 3 kg 3. 0 X X X X - X 120’ 105’ Airing Laundry is aired and refreshed for 30 minutes without heating. - - X X - - X - - Drying times Completes drying for min. 3-5 full size textiles (suitable for all fabrics). - X X X X - X * Test programme in accordance with EN 61121. 2 How to proceed if . . . Clean the filter at the end of every cycle. • • • • • • Open the door. Push the filter back into place. . . . you want to correctly care for and clean your dryer: Empty the water container at the end of each drying cycle. (For further information see chapter “Heat Exchanger” in the Instructions for Use). • Pull the handle to remove the water container. • Replace the water container when empty by pushing it completely back in place. • Remove fibres in and around the water evacuation hole at least once per month. Drying takes too long / laundry is not dry enough. • Has the correct drying programme been selected?• Was the inserted laundry too wet (washing machine spin speed less than 1000 rpm)?(for more information, refer to the instructions for use) • Is the room temperature too high?• Are the “ ” and “Anti-crease” “ ” indicator lamps lighting up?• If the drying result does not meet your expectation, select a more dry programme. • Is the plug properly inserted into the mains electricity socket?Is the heat exchanger clean? . . . you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the following points before phoning for the customer service – also refer to relevant chapter in the instructions for use) The dryer will not operate (after a power failure, always press the “Start (Pause)” button). Lint filter or water container indicator lamp on. Water droplets underneath the dryer. • Has the heat exchanger been inserted correctly?• Replace the faulty bulb with a new one and screw the glass cover back on. • Service call necessary. Replacing the drum light bulb (if supplied). All programme sequence indicators blinking. AFTER-SALES SERVICE If the fault is still present once the above checks have been undertaken or should the fault occur for a second time, switch the machine off. [. . . ] Buzzer and Anticrease cannot be selected together. Overdry protection The indicator lamp lights up when a humidity controlled program is selected, to indicate the working protection function. Function is not active in time controlled programmes 20’, 30’, 40’, 60’, 90’ and “Airing” “ ”. Delayed Start Delays the start of the drying cycle by 1 to 12 hours. Then press the “Start (Pause)” button to confirm the final selection and to start the dryer. The delayed start indicator lamp flashes and the countdown counts down in 1-hour intervals. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL HDD7000/PR0 BK




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL HDD7000/PR0 BK will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.