User manual WHIRLPOOL HB D41 S PROGRAM CHART

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL HB D41 S. We hope that this WHIRLPOOL HB D41 S user guide will be useful to you.


WHIRLPOOL HB D41 S PROGRAM CHART: Download the complete user guide (193 Ko)

Manual abstract: user guide WHIRLPOOL HB D41 SPROGRAM CHART

Detailed instructions for use are in the User's Guide.

[. . . ] These indicator lights switch on as soon as the cooking zones reach a high temperature. These indicator lights remain on even after switching off the relevant cooking zone and they switch off only when the temperature of the cooking zone is no longer dangerous. Important: To avoid permanently damaging the glass ceramic top, do not use: - pots with bottoms that are not perfectly flat, - metal pots with enamelled bottom. ELECTRICAL CONNECTION Power supply voltage 230 ~ + Number of wires x dimensions HO5 RR-F 3 x 1. 5 mm2 • • • • • • • • Energy saving Use pots and pans whose bottom diameter is equal to, or slightly larger than, that of the cooking zones. If the glass ceramic surface should break or crack, refrain from using it and call the After-sales Service immediately. [. . . ] • Remove baked-on dirt with the special scraper tool (if provided) and specific cleaning products. • Food spills should be cleaned off before they bake onto the glass ceramic surface. • Do not use abrasive products, chlorine-based cleaners, oven-cleaner spray or pan scourers. • The hob should be treated periodically with specific products available from the shops, following the manufacturer's instructions. WARNINGS • • • TROUBLESHOOTING GUIDE The hob does not work: - Check for the presence of mains electrical power. - Switch the hob off and then back on again, to see if the problem has been solved. Turn the multi-pole switch to “Off” for a few minutes and then turn it back to “On”. Type PLAVD 230 V~/50 Hz 2. 80 kW 5019 619 01061/A To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation. AFTER SALES SERVICE Before contacting After-Sales Service: • Make sure that you cannot solve the problem yourself following the points described in chapter “Troubleshooting Guide“. If after the above checks the fault persists, contact the nearest After Sales Service. Please give: • a brief description of the fault; • the type and exact model of the hob; • the service number (i. e. , the number that follows the word SERVICE on the rating plate, located under the hob). The service number is also indicated on the warranty booklet; • your full address; • your telephone number and area code. If any repairs are required, please contact an authorised After Sales Service (to guarantee that original spare parts will be used and repairs carried out correctly). Failure to comply with these instructions may compromise the safety and quality of the product. Declaration of conformity • • This cooktop is suitable for contact with foodstuffs and complies with EEC (CE) Regulation n. Any other use (such as heating a room) is improper and dangerous. • ACCESSORIES The glass cover can be ordered via the After Sales Service, with the code: AMC 966 NB (New Black) AMC 966 MR (Mirror). This cooking hob has been designed, constructed and marketed in compliance with: - safety objectives of the “Low Voltage” Directive 2006/ 95/CE (which replaces 73/23/CEE and subsequent amendments); - protection requirements of EEC Directive “EMC” 89/336; - requirements of EEC Directive 93/68. INSTALLATION Recommendations Important: Disconnect the hob from the mains before carrying out any installation work or servicing. • All electrical connections must be made before connecting the appliance to the power supply. • Installation must be carried out by a qualified technician in accordance with the manufacturer's instructions and in compliance with local regulations. • Unpack the hob and make sure that the appliance has not been damaged during transport. If you are not sure contact the dealer or the nearest service centre. Electrical connection • • Regulations require that the appliance is earthed. Connection to the mains must be carried out by a qualified technician in accordance with the manufacturer's instructions and in compliance with local regulations. The installer is responsible for connecting appliances correctly to the mains and for observing the safety regulations. [. . . ] • Open the terminal board by pushing the side clips in with the help of a tool. • Insert the cable in the cable clamp and connect the wires to the terminal board. • After the electrical connection, fit the hob from the top and hook it to the fixing springs, as shown in fig. 1 Glass ceramic hob Important: remove any protective film before installing the hob. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL HB D41 S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL HB D41 S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.