User manual WHIRLPOOL DST 6460 ES INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL DST 6460 ES. We hope that this WHIRLPOOL DST 6460 ES user guide will be useful to you.


WHIRLPOOL DST 6460 ES INSTRUCTION FOR USE: Download the complete user guide (655 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL DST 6460 ES MODE D'EMPLOI (657 ko)
   WHIRLPOOL DST 6460 ES GEBRUIKSAANWIJZING (658 ko)
   WHIRLPOOL DST 6460 ES BEDIENUNGSANLEITUNG (657 ko)
   WHIRLPOOL DST 6460 ES INSTRUZIONI PER L'USO (656 ko)
   WHIRLPOOL DST 6460 ES LIBRO DE INSTRUCCIONES (656 ko)
   WHIRLPOOL DST 6460 ES INSTRUZIONI PER L'USO (656 ko)

Manual abstract: user guide WHIRLPOOL DST 6460 ESINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] • The appliance is not intended for use by persons (including children) with any physical, sensory or mental impairment, or without experience and knowledge of the appliance, unless supervised or previously instructed in its use by those responsible for their safety. • Customer care: do not repair or replace any parts of the appliance, unless specifically recommended by the manual. All other maintenance operations must be carried out by a qualified technician. • When drilling through the wall pay attention not to damage electric connections and/or pipes: • Air vents must always discharge to the outside. [. . . ] If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth. IMPORTANT: do not use abrasive sponges or metallic scrapers or scourers. • Use detergents specifically designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT: clean the filters at least monthly to remove any oil or grease residuals. GB13 MAINTENANCE Warning!Before carrying out any cleaning or maintenance operations disconnect the hood from the power supply by removing the plug from the socket, or switching the general house mains switch off. GREASE FILTER MAINTENANCE The filter traps all cooking grease particles. Wash the metal grease filter once a month (or when the filter dirty notification system indicates that the filter needs washing). It may be hand washed, or placed in the dishwasher on a short low temperature cycle. Note: If washed in the dishwasher, the colour of the metal grease filter may fade. 2 Remove the grease filter by rotating the knobs (g) that secure the filter to the hood 90°. CARBON FILTER MAINTENANCE The carbon filter traps unpleasant cooking smells. Differently from traditional carbon filters, this type of carbon filter may be cleaned and reactivated. With normal use of the hood, the filter should be washed once a month. The best way to wash the carbon filter is by placing it in the dishwasher at the highest temperature, using a standard dishwasher detergent. To avoid any food or dirt particle to get trapped in the filter during washing, causing bad smells after, we recommend that the filter is washed on its own. After washing, the carbon filter must be reactivated: place it in the oven at a temperature of 100°C for 10 minutes. The filter will keep its capacity to absorb smells for three years, after which time it must be replaced. Position the carbon filter pad around the grease filter, securing it using the appropriate securing devices. (Fig. 4) - Only use 20W max - GU4 - 12V - Ø 35mm - 30° - Dichroic halogen lamps, making sure not to touch them. Important: make sure you don't touch the lamp with your hands. WARNING: - Before performing this operation disconnect the hood from the electric power supply. If the lamps do not work, before contacting customer care ensure that they are fitted correctly. GB14 ITEMS SUPPLIED Remove all components from their packages. • Assembled hood with motor, lamps, and grease filter installed • Assembly and user instructions • 1 Installation template • 1 Hood support bracket • 4 x 8mm Ø wall plugs • 4 x 5mm Ø x 45mm long screws • 7 x 3. 5mm Ø x9. 5mm long screws • 2 washers • 1 - Torx T10 adapter • 1 - Torx T20 adapter INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS The hood has been designed to be installed as a "Filter Model". Filter model The air is filtered through one or more the carbon filters, and then resent into the room. IMPORTANT: Ensure appropriate air circulation around the hood (carefully follow the instructions on the installation manual). [. . . ] This operation should be performed when: • the hood is installed for the first time; • there is a power cut lasting several hours or days; • a very quick temperature change occurs in the kitchen. Sensor test The sensor test is performed continually during automatic operation. In case of fault, keys “1” and “6” flash (contact customer service). In this case it will still be possible to use the hood in manual mode. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL DST 6460 ES




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL DST 6460 ES will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.