User manual WHIRLPOOL 8572777-D-WH

[. . . ] ® Gas Washer/Dryer OVERALL DIMENSIONS PRODUCT MODEL NUMBER LTG6234D Gas supply: Dryer is equipped for use with NATURAL gas. [. . . ] The dryer can be converted to exhaust out right or left side. 71/" (181. 9 cm) 23³/" (60. 3 cm) * Most installations require a minimum 5¹/" (14 cm) clearance behind the dryer for the exhaust vent with elbow. *32" (81. 3 cm) 27" (68. 6 cm) 32¹/" (81. 9 cm) RECESSED AREA AND CLOSET INSTALLATION Additional clearances might be required for wall, door and floor moldings. Rear clearance may be 0" when house exhaust system is lined up directly with dryer exhaust. A B 6" (15. 2 cm) 48 in. 2 (310 cm2) C 3" (7. 6 cm) EXHAUST VENTING Plan installation to use the fewest number of elbows and turns. Maximum length of the exhaust system depends upon the type of vent used, number of elbows and the type of exhaust hood. The maximum length for both rigid and flexible vent is shown in the chart. B 2 4" (10. 2 cm) 24 in. 2 (155 cm2) 1" 32" 27" 1" 1" (2. 5 cm) (68. 6cm) (2. 5cm) (2. 5 cm) (81. 3 cm) 5¹/" (14 cm) 3" (7. 6 cm) A 1 4" (10. 2 cm) 4" (10. 2 cm) A. Closet door with vents (6. 4 cm) Angled hood style DRAIN SYSTEM Standpipe drain system - wall or floor The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). A 2" (5 cm) diameter to 1" (2. 5 cm) diameter standpipe adapter kit is available. The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (2. 4 m) from the bottom of the washer. The top of the laundry tub must be at least 34" (86. 4 cm) above the floor and no higher than 96" (2. 4 m) from the bottom of the washer. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]