User manual VISIONEER XP470

[. . . ] Visioneer® Strobe XP 470 USB Scanner User's Guide for Windows Visioneer Strobe XP 470 USB Scanner User's Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2005 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. [. . . ] Selecting Reduce Moire Patterns will limit or eliminate moire patterns in the scanned image. This option is only available for the Grayscale or Color Mode at 200dpi or less. Invert Image--Only available for Black&White Mode, this option reverses the black and whites of an image. Original Image Inverted Image Duplex--Scan both sides of the page. If this option is not selected, the scanner will scan the front side of the page only. Note: Because you can set Duplex and Simplex for the OneTouch buttons, there could be a conflict when you press the Simplex or Duplex button on the scanner. Regardless of the OneTouch setting, the scanner button always takes precedence. In other words, even if the LED number on the scanner has a setting for Duplex, when you press the Simplex scanner button the scanner scans in Simplex mode, and vice versa. Skip Blank Originals--Skips pages that are completely blank. Typically you use this option when you will scan a stack of twosided pages which have a number of blank sides. This option is only available for Duplex scanning. CONFIGURING THE ONETOUCH BUTTONS 63 Color Filter--Color filter is the ability of your scanner to automatically remove a color from a scanned item. For example, if you are scanning a letter with a red watermark, you can choose to filter out the red so the scanned letter just shows the text and not the red watermark. Color filter applies to Black&White or Grayscale Mode. The original with a red watermark over black text. The options of the Advanced Settings tab are for the Color or Grayscale scanning mode. Saturation is the strength or purity of a color, hue is the color your eyes see as reflected from the image, and gamma controls the brightness of the midtones of the color. 9. As you do, the image changes to show the effects of the new settings. 64 VISIONEER STROBE XP 470 SCANNER USER'S GUIDE 10. It will now appear in the list of Scan Configurations on the OneTouch Properties window for the appropriate Destination applications. THE DEVICE SETTINGS TAB A Device Settings tab appears on the Scan Configurations dialog box when your selected Destination Application sends the scanned image to a printer, fax application, or other device. You use the options on the Device Settings tab to select settings for the device. Click on the Device Settings tab. Fit to page, reduce image if necessary--If the scanned image is too big to be printed or faxed on a single page, the image will automatically be reduced to fit the page. Actual size, crop image if necessary--If the scanned image is to big to be printed or faxed on a single page, the image will automatically be cropped around its edges to fit on the page. Center image on page--The image will be printed in the center of the page instead of at the top right corner. CONFIGURING THE ONETOUCH BUTTONS 65 Maintain aspect ratio--The aspect ratio is the length-to-width relationship of the image's dimensions. Select this option so the image's relative proportions remain constant. AutoRotate image for best fit--If the image is a Landscape format and the device is printing in the Portrait mode, or vice versa, rotate the image to fit on the page. Collate copies--If you're printing more than one page, collate the copies. For example, if the device is your printer, the dialog box is your printer's setup settings. [. . . ] To recover the file, you can import it into PaperPort by using the Import command in the File menu. Uninstalling does not delete your scanned items, and they remain in the PaperPort Data folder. TROUBLESHOOTING 129 STATUS LIGHT TROUBLESHOOTING CODES A green status light indicates the normal state of the scanner. NORMAL OPERATION Blinking green: indicates the scanner is waking up from power saving and preparing to scan. Steady green: indicates the scanner is ready to scan. ERROR CODES If your scanner experiences hardware problems, the status light will blink red, and the LED flashes an "E" and the error code number. The LED blinks back and forth between "E" and the error code number (such as 6). The red light flashes the number of times as the error code (6 in this example). The table below describes the error codes. 130 VISIONEER STROBE XP 470 SCANNER USER'S GUIDE Error Code 0 Problem Description Scanner is not connected to the computer. (The LED does not flash "E" and the status light remains green. ) The scanning hardware in the body of the scanner has malfunctioned. [. . . ]