User manual VICTORINOX SWISS ARMY ST 4000
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual VICTORINOX SWISS ARMY ST 4000. We hope that this VICTORINOX SWISS ARMY ST 4000 user guide will be useful to you.
You may also download the following manuals related to this product:
VICTORINOX SWISS ARMY ST 4000 (11052 ko)
VICTORINOX SWISS ARMY ST 4000 (440 ko)
VICTORINOX SWISS ARMY ST 4000 (455 ko)
VICTORINOX SWISS ARMY ST 4000 (1264 ko)
VICTORINOX SWISS ARMY ST 4000 (11054 ko)
VICTORINOX SWISS ARMY ST 4000 (1264 ko)
VICTORINOX SWISS ARMY ST 4000 (524 ko)
VICTORINOX SWISS ARMY ST 4000 (1264 ko)
Manual abstract: user guide VICTORINOX SWISS ARMY ST 4000
Detailed instructions for use are in the User's Guide.
[. . . ] Pressing the Adjust Button Resets the Stopwatch when the Stopwatch is displayed.
6 7
S/S
Pressing the Adjust Button
ADJ
1. Moves from one setup step to the next and exits setup after completion. Enters the format selection mode.
SETUP STEP-BY-STEP Clock Setup Step 1 Clock Function. Press the Clock Button to display the Clock.
ADJ
SETUP STEP-BY-STEP Clock Setup (con't. ) Step 5 Advance minutes. [. . . ] When you enter the barometer reading, the altitude is also adjusted in the altimeter. Note: The analog and digital movements of this watch operate indenpendantly. Please set each individually to ensure they are kept in sync.
17
ALTIMETER AND BAROMETER DETAILS Effects of Atmospheric Pressure Changes. A change in atmospheric pressure will make the displayed altitude different from the known altitude of a landmark. The ST 4000 can be adjusted so that it displays the same altitude as the landmark. Minor atmospheric pressure changes may cause the displayed altitude to vary from the actual altitude by 50 feet. With the arrival or departure of a weather front, displayed altitude can change 100 to 200 feet, and a storm can cause a change of more than 200 feet. Synchronization (the relation between altitude and sea level barometer) is set at the factory. To ensure barometer accuracy you can check it after a year or two and correct minor drift if necessary. You must know your current altitude and must get the current sea level barometer from a local airport or weather broadcast to make this adjustment. You can also synchronize the thermometer if it reads consistently high or low over a range of temperatures.
Thermometer Accuracy. The ST 4000 measures the ambient air temperature with a sensor inside its case. When the watch is worn against your skin, temperature readings will be affected significantly. For accurate readings, remove the watch from your wrist and place away from direct sunlight. The Altimeter and Thermometer revert to the Clock 10 minutes after the last time a button is pressed.
19
ADJUSTING THE ALTIMETER AND BAROMETER Adjust at a known altitude when you want precise altitude readings or when you want to update the sea level barometer. Press the Altimeter Button to display the Altimeter.
ADJ
ADJUSTING THE ALTIMETER AND BAROMETER (Con't. )
Effect on Sea Level Barometer. When you adjust the altitude the sea level barometer is set at the same time. Press the Adjust Button the Altimeter digits blink and an arrow at the left of the display toggles between up and down.
S/S
Step 3 Change Altitude. Press the Start/Stop Button to move the Altimeter up or down in 5-foot increments in the arrow direction.
ADJ
Sea Level Barometer After Altitude Adjust
Step 4 Exit. At the correct altitude press the Adjust Button to exit.
20 21
SETTING THE BAROMETER Barometer & Altimeter Adjust from a Weather Report Updating the barometer from a broadcast or airport weather report will adjust the altitude concurrently. Press the Adjust Button the Barometer digits blink and an arrow at the left of the display toggles between up and down. Press the Start/Stop Button to move the Barometer up or down in . 01-inches-of-mercury increments in the arrow direction.
22
ADJ
SETTING THE BAROMETER Barometer & Altimeter Adjust from a Weather Report (con't. ) Step 4 Exit. [. . . ] Altitude and vertical feet displays update frequently if there has been a change in altitude or a button has been pressed recently. Atmospheric pressure changes during a day's activity affect the accumulated vertical feet very littleusually less than 1%.
37
USING THE SPORT FUNCTIONS IN HIKING AND CLIMBING Example: Recording vertical ascent and maximum altitude on a hike. Step 1 At the trailhead reset Vertical Ascent.
ADJ
Step 3 Reset Maximum Altitude.
Step 4 After completing your hike, turn the accu.
Step 2 Start the Vertical Ascent accumulator.
ADJ
S/S
S/S
S/S S/S
If your hike is a loop or out-and-back, accumulated ascent and descent will be the same. Remember that accumulation does not begin until you have climbed 30 feet. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE VICTORINOX SWISS ARMY ST 4000
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual VICTORINOX SWISS ARMY ST 4000 will begin.