User manual US ROBOTICS USR2210 QUICK START

[. . . ] It is very important that you have your serial number written down before you install the 22 Mbps Wireless PCI Adapter. You can find your serial number on the back label of the 22 Mbps Wireless PC Card and on the side of the package. If you ever need to call our Technical Support department, you will need this number to receive assistance. Note: It can be tricky getting the PCI Adapter into the PCI slot. Note: If you experience any problems installing the PCI Adapter, try installing it in a different PCI slot. Turn on your computer. [. . . ] Each 22 Mbps Wireless PC Card or PCI Adapter in the wireless network must have the correct mode selected within the Configuration Utility. The 22 Mbps Wireless Cards and PCI Adapters are set to Auto Detect by default. For troubleshooting and technical support information, refer to the User Guide on the U. S. Robotics Installation CD-ROM. Serial Number Note: Be sure to find out what letter your CD-ROM drives uses before you begin installing your new product. Note: During the Installation procedure, you may be prompted for your Windows Operating System CD-ROM. Make sure you have that available in case you need it. Note: If the Choose Setup Language window appears, select your preferred language and click OK. Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type D:\setup (or the appropriate letter of your CD-ROM drive) and click OK. Some files will be copied to your system, and then you will be asked to read the license agreement. The Installation CD Graphic User Interface (GUI) will appear on your screen. Follow the on-screen instructions and wait for some files to be copied to your hard drive. A window will appear showing you the files that are being loaded onto your system. When you are prompted to reboot your computer, select No, I will restart my computer later and click Finish. Windows Me and 2000 will verify that your network device is properly installed. R24. 0285. 00 22 Mbps Wireless PC Card Installation Guide Note: For the most updated information, visit: http://www. usr. com/support. You can also refer to the Companion Reference Guide and to the User Guide on the U. S. Robotics Installation CD-ROM for more detailed information. Install your software and drivers* Note: You will need to install this software on all the laptops you plan to wirelessly network together. Note: If the Choose Setup Language window appears, select your preferred language and click OK. Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type D:\setup (or the appropriate letter of your CD-ROM drive) and click OK. Some files will be copied to your system, and then you will be asked to read the license agreement. The Installation CD Graphic User Interface (GUI) will appear on your screen. Follow the on-screen instructions and wait for some files to be copied to your hard drive. A window will appear showing you the files that are being loaded onto your system. If you are prompted to reboot your computer, select Yes, I want to restart my computer now and click Finish. [. . . ] You can find your serial number on the back label of the 22 Mbps Wireless PC Card and on the side of the package. If you ever need to call our Technical Support department, you will need this number to receive assistance. Insert the 22 Mbps Wireless PC Card into your computer Locate an available PC Card slot and fully insert the 22 Mbps Wireless PC Card. You should hear a beep when the 22 Mbps Wireless PC Card is fully inserted and detected. Serial Number Note: Be sure to find out what letter your CD-ROM drives uses before you begin installing your new product. Note: During the Installation procedure, you may be prompted for your Windows Operating System CD-ROM. [. . . ]