User manual TYAN TRINITY I845

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TYAN TRINITY I845. We hope that this TYAN TRINITY I845 user guide will be useful to you.


TYAN TRINITY I845 : Download the complete user guide (583 Ko)

Manual abstract: user guide TYAN TRINITY I845

Detailed instructions for use are in the User's Guide.

[. . . ] Trinity i845 S2090 User's Manual Revision 1. 00 Copyright © Tyan Computer Corporation, 2001. No part of this manual may be reproduced or translated without prior written consent from Tyan Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Intel, Intel Pentium, i845, combinations thereof are trademarks of Intel Corporation. Iomega, Zip are registered trademarks of Iomega Corporation. Information contained in this document is furnished by Tyan Computer Corporation and has been reviewed for accuracy and reliability prior to printing. [. . . ] 3. 1 Standard CMOS Features In this section, you can alter general features such as the data and time, as well as access to the IDE configuration options. Note that the options listed below are for options that can directly be changed within the Main Setup screen. HH: Hours (24 hour format) MM: Minutes SS: Seconds None Auto Manual None Auto Manual None 360K, 5. 25 in. Same options as Drive A Adjusts the system clock. System Time IDE Primary Master/Slave Default: Auto Detects IDE drives. IDE Primary Master/Slave Default: Auto Detects IDE drives. Defines floppy drive type. Drive A Default: 1. 44M, 3. 5 in. Drive B Default: None Video Default: EGA/VGA Defines floppy drive type. EGA/VGA CGA 40 CGA80 Defines video display mode. 29 http://www. tyan. com MONO 3. 2 Advanced BIOS Features In Advanced BIOS Features, you will be able to adjust many of the feature that effect system speed and bootup options. Virus Warning Default: Disabled Enabled Disabled Toggles protection of the boot sector on the hard drive from being corrupted by a virus. Changes the system book sequence and defines which device will boot first. CPU L1 & L2 Cache Default: Auto Enabled Disabled First to Other Boot Device Swap Floppy Drive Default: Disabled Boot Up Floppy Seek Default: Enabled Boot Up NumLock Status Default: On Gate A20 Option Default" Fast Typematic Rate Setting Default: Disabled Typematic Rate (chars/Sec) Default: 6 Typematic Delay (MSec) Default: 250 Floppy LS-120 HDD-0 SCSI CDROM HDD-1 HDD-2 HDD-3 ZIP100 LAN Disabled Enabled Disabled Enabled Disabled On Off Fast Normal Enabled Disabled 6, 8, 10, 12, 15, 20, 24, 30 Enables turns A: drive into B: drive and vice versa. Defines the delay that occurs at key stroke before that key will start to repeat. Sets the password on either just the BIOS setup or the entire system (BIOS setup included). Select OS2 only if you are running OS/2 operating system with more than 64MB of RAM. Tells Win9x not to display the floppy drive if there are 250, 500, 750, 1000 Security Option Default: Setup OS Select for DRAM > 64MB Default: Non-OS2 Report No FDD for WIN95 Default: No Setup System Non-OS2 OS2 No Yes 30 http://www. tyan. com Small Logo(EPA) Show Default: Disabled Enabled Disabled none installed. Toggles the display of the EPA Energy Star logo at POST. 3. 3 Advanced Chipset Features In Advanced BIOS Features, you will be able to adjust many of the feature that effect system speed and bootup options. DRAM Timing Selectable Default: By SPD Memory Frequency For Default: Auto DRAM Read Thermal Mgmt Default: Disabled System BIOS Cacheable Default: Enabled Video BIOS Cacheable Default: Disabled Video RAM Cacheable Default: Disabled Manual SPD PC100 PC133 Auto Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Leave as Default. Leave as Default. Leave as Default. Memory Hole At 15M-16M Default: Disabled Delayed Transaction Default: Enabled AGP Aperture Size (MB) Default: Disabled Delay Prior to Thermal Default: Enabled 3. 4 Integrated Peripherals Enabled Disabled 4, 8, 16, 32, 64, 128, 256 4, 8, 16, 32 Toggles BIOS caching on and off. Creates a memory reserve at 15 to 16MB address in RAM for ISA devices that require it. Leave as Default. Leave all settings in this section as their default options. 3. 5 Power Management SEtup Leave all settings in this section as their default options. 31 http://www. tyan. com 3. 6 PnP/PCI Configurations Rest Configuration data Default: Disabled Resources Controller by Default: Auto(ESCD) IRQ Resources PCI/VGA Palette Snoop Default: Enabled Enabled Disabled Auto(ESCD) Manual Leave as Default. Leave as Default. Enabled Disabled 3. 7 Frequency/Voltage Control CPU Clock Ratio Leave as Default. 32 http://www. tyan. com 4. 0 Installing the hard drives Hard drives must be of the Fast ATA-2, EIDE, or UltraDMA-33/66/100 type if you want to use them with the RAID controller. For best performance, we recommend that you use drives of identical model and capacity. If you are planning to use an UDMA-66 or 100 drive, you must use an UltraDMA-66/100 cable (Tyan has included that cable with the motherboard). Step 1: The first step is to set the hard drive to Master, Slave, or Cable Select setting, and install them according to the table below. Note: Sometimes the Master drive with no Slave attached is called "single". The Master/Slave setting differentiates two drives connected on the same cable. NOTE: Check your HDD documentation for master, slave, and cable select settings. Jumper Settings (see your HDD documentation for jumper settings) # of Drives 1 2 3 4 IDE Channel 1 M M M&S M&S M=Master, S=Slave IDE Channel 2 M M M&S Step 2: Next, you should install the drives into your system, and connect the power. [. . . ] Standby mode: in this mode, the video and hard drives shut down; all other devices continue to operate normally. Striping: see RAID UltraDMA-33/66/100: a fast version of the old DMA channel. Without proper UltraDMA controller, your system cannot take advantage of higher data transfer rates of the new UltraDMA/UltraATA hard drives. This one port type can function as a serial, parallel, mouse, keyboard or joystick port. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TYAN TRINITY I845




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TYAN TRINITY I845 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.