User manual TP-LINK TL-SC3130

[. . . ] Rev: 1. 0. 0 1910010184 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] MPEG4 viewer port: Enter the MPEG4 viewer port number and the default MPEG4 viewer port is 8090. MPEG4 viewer port (SSL): Enter the MPEG4 SSL viewer port and the default MPEG4 viewer port number is 8091. MJPEG viewer port: Enter the MJPEG viewer port number and default MJPEG viewer port is 8070. MJPEG viewer port (SSL): Enter the MPEG4 SSL viewer port and default MJPEG viewer port number is 8071. MPEG4 RTSP port: Enter the MPEG4 RTSP port, default value is 8050 for computer view, 8030 for mobile view. Note: UPnP (Universal Plug and Play): UPnP is a set of computer network protocol. It allows devices to connect seamlessly and simplify the implementation of networks at home and corporate environments. The device will be automatically detected and a new icon will be added to "My Network Place" if it also enables on your computer. It provides Port Forwarding for opening a port in a router or firewall in a private network in order to let a party from the outside world contact a inside user. 31 6. 3. 5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP networks. Bonjour uses industry standard IP protocols to allow devices to automatically discover each other without the need to enter IP addresses or configure DNS servers. Device Name: Enter Device Name to your needs. Please check the link below: http://www. apple. com/support/downloads/bonjourforwindows. html 6. 3. 6 IP Notification When network notify type is set to "ON", you can send an e-mail notification of the completion of the network setting. 32 Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. SMTP Server Name: Type the SMTP server name up to 64 characters, or the IP address of the SMTP server. SMTP Server Port: You can set port number from 1~65535 according to your mail server. Note: If you use g-mail as your mail server, you should set 587 as your port number and check SSL box. Authentication: Select the authentication required when you send an email. Off: Select this if no authentication is necessary when an email is sent. On: If authentication is necessary when an e-mail is sent, there are SMPT, POP before SMPT or both three options. SMTP: Select this if SMTP authentication is necessary when an e-mail is sent. POP before SMTP: Select this if POP before SMTP authentication is necessary when an e-mail is sent. If this option is selected, the IP Notification page will be different as following figure shown. 33 POP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account. [. . . ] Schedule: You can specify the period when the periodical sending is effective in the Schedule setting in the other section. (Please go to "Setting Advance Schedule Setting") For more details, you can check Section 7. 4. 7. 4 Schedule When you click Schedule on the Advance mode menu, the Schedule setting menu appears. This is the same menu as the setting menu which is displayed when you click Schedule to set Effective period and Schedule in FTP client setting menu, e-Mail (SMTP) setting menu, HTTP Event setting menu and so on. Example: When setting e-Mail (SMTP) (the alarm sending) in the Schedule setting menu. 53 7. 4. 1 Setting Schedule Selection: Select the list box to specify the schedule you want to set. [. . . ]