User manual TP-LINK TL-PA4015PKIT

[. . . ] 10 2. 1. 4 Disconnecting an USB Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. 1. 5 Request to Disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. 1. 6 Setting the Polling Interval. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2. 1. 7 Setting the MFP and Storage Server by Setup Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It's designed to connect your USB printers, MFP and USB storage devices to your network, allowing all network users access to these USB devices remotely. 1. 2 Network Management MFP and Storage Server support the WEB management, which remote management and a warning. Any standard WEB browser can be used to access and manage these MFP and Storage Servers. 1. 3 Components and Features 1-USB2. 0 Port MFP and Storage Server 1 USB2. 0 port (High-speed) Fast Ethernet network port: RJ-45 for 10Base-T or 100Base-TX LINK LED to indicate network connection, 100M LED to indicate 100M connection, USB LED to indicate USB status One Setup CD for Windows 2000/XP/Vista, User's Guide One power adapter Built-in Reset Button Before you start, you should prepare: One Windows 2000/XP/Vista computer with CD-ROM drive One USB devices with USB port 1. 4 Hardware Installation Make sure that your USB devices are switched off and that the MFP and Storage Server's power adapter is disconnected. 1) Connect your USB device to the USB port of the MFP and Storage Server. 1 2) Connect the MFP and Storage Server to the router or switch/HUB with the Ethernet cable. 3) Connect the power adapter to the MFP and Storage Server. When the Link LED lights up, the MFP and Storage Server is correctly connected to the network. 2 1) 2) The Software Installation Insert the setup CD into your CD-drive. Click the TL-PA4015PKIT to begin the setup. 2. 1 For Windows 2000/XP Users 2 3) Choose your operating system to install all software programs. 4) When the installation completed, click "Finish" to close the installation wizard. 3 5) On your desktop you will see a new icon, double-click the icon and it will bring up the MFP and Storage Server setup utility. 6) The setup utility will show up and display all the active MFP and Storage Servers on your network. In this screen, you will see the product listed as "TL-PA4015PKIT-2B5111(192. 168. 0. 10)". The "2B5111" is the last 6 digits of the MFP and Storage Server's MAC address, and the "192. 168. 0. 10" is the MFP and Storage Server's IP address. 4 2. 1. 1 Connecting to an USB Device a) Connect the USB cable on your USB device to the USB port of the MFP and Storage Server, and make sure both the USB device and the MFP and Storage Server are powered on. The USB device will then show up on the MFP and Storage Server utility as a green icon. The green icon indicates that the USB device is ready to be connected. If for any reason the USB device does not show up, please click the "Search" button to refresh the list. 5 Note: If your USB device does not show up on the list, please try to disconnect and reconnect the USB device to the USB port of the MFP and Storage Server. Also, please make sure the MFP and Storage Server and your USB device are powered on. Select "Install this driver software anyway" to continue. 5) Click on "Finish" to complete the installation process. 19 6) Once the installation process has been completed, an "Launch MFP and Storage Server" icon will be shown on Desktop. 7) Double click on it for the first time execution. Windows Vista will pop up a firewall setup window, please choice "Unblock". 8) After finishing Firewall setup, MFP and Storage Server utility will finish the setup procedure automatically. 20 2. 2. 1 Connecting to an USB Device a) After you have successfully installed the MFP and Storage Server driver, connect the USB device to the USB port of MFP and Storage Server and make sure both the USB device and the MFP and Storage Server are powered on. When the USB device is connected, the MFP and Storage Server will detect the connection of the USB device, and an icon of the USB device will show up in the Network window. In this example, we have connected a USB flash disk. b) c) Right-click on the USB device that you want to connect to and select "Connect" to establish the connection. You will see the device driver is installing and the status will show at the bottom right corner on your system tray. If you would like to give the MFP and Storage Server a static IP address, you will need to Disable DHCP in the "DHCP Setting" menu". Once DHCP is disabled, enter the desired IP address on the IP address field along with the subnet mask and click "Save & Restart" button to reboot the MFP and Storage Server. 24 Please note that if the MFP and Storage Server has a set password, you will need to enter it into the password field box. Misc: Allow you to restore the MFP and Storage Server back to factory default. And, the firmware link will allow you to upload the latest firmware on the MFP and Storage Server. Click on "Browse" to specify the firmware location on your computer. Once the location path of firmware has been set, click "Firmware Upgrade" to begin the update. 25 Please note that if the MFP and Storage Server has a set password, you will need to enter it into the password field box. Restart: The Restart window will allow you to reboot the MFP and Storage Server. Please note that if the MFP and Storage Server has a set password, you will need to enter it into the password field box. 26 4 Troubleshooting 4. 1 Frequently Asked Questions 1) Why can't I connect my USB device to my computer through MFP and Storage Server?Make sure the USB device functions normally when you plug it into your computer via USB cable. [. . . ] Although the MFP and Storage Server could work with a very wide spectrum of USB devices, it still has limited support on some USB devices. 2) Why can't I see any servers on my MFP and Storage Server listing window after installing it?Please make sure that all of your MFP and Storage Server are correctly connected to your network. Also, certain anti-virus programs come with firewall functions that might prevent the MFP and Storage Server setup utility from accessing the network. [. . . ]