User manual TOYOTA SURJETEUSE SLR4D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOYOTA SURJETEUSE SLR4D. We hope that this TOYOTA SURJETEUSE SLR4D user guide will be useful to you.


TOYOTA SURJETEUSE SLR4D : Download the complete user guide (10491 Ko)

Manual abstract: user guide TOYOTA SURJETEUSE SLR4D

Detailed instructions for use are in the User's Guide.

[. . . ] Use only attachments recommended by the manufacturer as contained in this manual. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust, and loose cloth. [. . . ] Page 13 English Threading When threading the machine from the beginning, threading must be carried out in the following sequence: First: Upper looper threading (B) Second :Lower looper threading (A) Finally: Needle threading (C, D) Español Enhebrado Del Hilo Al enhebrar la máquina desde del principio, el enhebrado debe ser hecho siguiendo los pasos detallados a continuación: Primero: Enhebrado del crochet superior (B) Segundo: Enhebrado del crochet inferior(A) Finalmente: Enhebrado de las agujas (C, D) Enhebrado del crochet inferior Empuje la tapa frontal hacia la derecha y dóblela hacia abajo, hacia Ud. afirme el hilo sacado del cono y páselo a través de la guía dos del guía hilos telescópico , y después , siguiendo el orden , a través de las guías , y , finalmente por el disco de tensión . (Fig A) Lower looper threading Section 2 Push the front cover to the right, and fold it down towards you. Take the thread drawn from the spool and pass it, through guide of the thread stand and then, in order, through guides , , and thread tension dial . A) Linfilatura deve essere eseguita nel seguente ordine: Primo: Infilatura del passafilo superiore(B) (BIeu) Secondo: I’infilatura del passafilo inferiore (A) (Verde) Infine: Infilatura degli aghi(C) (arancio) ago di destra, (D) (giallo) ago di sinistra. Bring the lower looper to the far left position by turning handwheel towards you, and pass the thread 11 through lower looper thread guide . Then, move the lower looper slightly to the right by turning the handwheel towards you. D) Section 2 Upper looper threading • Bring the upper looper to its lowest position by turning handwheel toward you. € Draw thread from spool and pass it, through guide of the thread stand and then, in order, through guides ~ (Fig. Page 19 English Bring the lower looper to the far left position by turning handwheel towards you, and pass the thread through lower looper thread guide . B) Then move the lower looper slightly to the right by turning the handwheel towards you. C) 2 Upper looper threading • Bring the upper looper to its lowest position by turning handwheel towards you. € Draw thread from spool and pass it, through guide of the thread stand and then, in order, through guides ~ . Page 23 English Preparation for Sewing and Checking • Check that no thread slips off or snaps. € Confirm that the upper knife moves against the lower knife correctly by turning the handwheel slowly towards you. If it is not correct, check if there is any fabric or waste thread between knives. € Turn the handwheel towards you with your right hand to check that the thread winds around the stitch finger of the needle plate. If the thread doesn’t wind around the stitch finger of the needle plate, check if any threads are threaded incorrectly. Page 29 English Adjustment of the Presser Foot Pressure The presser foot pressure is preadjusted for materials of medium (standard) thickness. Adjustment is necessary only when you work on very thin or very thick materials. Accordingly, sew thinner materials with less pressure and thicker materials with more pressure. Increase the pressure of the presser foot by tightening the adjustment screw. [. . . ] Thread tensions will differ according to the kind of fabric and the thread. Section 3 k Page 53 English SETTING WASTE TRAY (Option on some models) (1) Insert the right guide a of the waste tray to the right leg of the overlock machine as illustrated. A (2) Push the left end of the waste tray in the direction of arrow. Section 9 Halteschraube bündig abschließen Stichplatte Klemschroef van het onderste mes op één lijn brengen naaldplaat Vite del coltello inferiore Allineare Placca ago unterer Abschneider onderste mes Coltello inferiore Page 73 English (1) Replacing the lower knife: Loosen the lower knife clamp screw and change the knife for a new one. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TOYOTA SURJETEUSE SLR4D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOYOTA SURJETEUSE SLR4D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.