User manual TOSHIBA USB 2.0 PORT REPLICATOR II
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA USB 2.0 PORT REPLICATOR II. We hope that this TOSHIBA USB 2.0 PORT REPLICATOR II user guide will be useful to you.
You may also download the following manuals related to this product:
TOSHIBA USB 2.0 PORT REPLICATOR II (261 ko)
TOSHIBA USB 2.0 PORT REPLICATOR II (233 ko)
TOSHIBA USB 2.0 PORT REPLICATOR II (247 ko)
TOSHIBA USB 2.0 PORT REPLICATOR II (232 ko)
TOSHIBA USB 2.0 PORT REPLICATOR II (215 ko)
TOSHIBA USB 2.0 PORT REPLICATOR II (233 ko)
Manual abstract: user guide TOSHIBA USB 2.0 PORT REPLICATOR II
Detailed instructions for use are in the User's Guide.
[. . . ] 15 7 EVACUATING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 8 ELECTRICAL WORK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 9 APPLICABLE CONTROLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 10 TEST OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Upon approval of the customer, install the air conditioner in a place that satisfies the following conditions. Place where a sufficient servicing space can be ensured for safety maintenance and check. Place exposed to air with high salt content (seaside area), or place exposed to large quantities of sulfide gas (hot spring). (Should the unit be used in these places, special protective measures are needed. ) Place exposed to oil, vapor, oil smoke or corrosive gas. Place where the discharged air blows directly into the window of the neighboring house. (For outdoor unit) Place where noise of the outdoor unit is easily transmitted. (When installing the air conditioner on the boundary with the neighbor, pay due attention to the level of noise. ) Place with poor ventilation. (Before air ducting work, check whether value of air volume, static pressure and duct resistance are correct. )
Installation space
Secure the specified space in the figure for installation and servicing. Ensure there is sufficient space to install the unit and to perform maintenance work as and when required. Keep 15 mm or more for clearance between top plate of the indoor unit and the ceiling surface. Installation space
15 or more
1000 or more
15 or more
1000 or more
283 or more
1000 or more
Obstacle
EN
4
283 or more
ADVICE
Set a service check opening panel at right side of the unit (size: 450 450 mm or more) for piping, maintenance, and servicing.
Ceiling height
Model RASM10SMUV-E, M10SMUCV-E, M13SMUV-E, M13SMUCV-E M16SMUV-E, M16SMUCV-E Possible installed ceiling height Up to 2. 7 m Up to 3. 5 m DEUTSCH
How to set the High ceiling switch Remove the cover of the electric parts box by taking off the mounting screws (3 positions) and pushing the hooking section. Do not strap the unit in positions other than stated.
EN
6
1000 or more 15 or more
1000 or more
595 to 660 Ceiling open dimension
Sensor part
595 to 660 Ceiling open dimension
Obstacle
Check port (!450)
Drain-up standing-up size
Bottom face of ceiling
Note As ABS is used for the drain discharge port of the main unit, the vinyl chlor paste cannot be used. Use the flexible hose (Band fix) included in the package.
368. 5 Knockout for fresh air intake 100 (diam. ) 700 Panel external dimension 145. 5 Bottom face of ceiling 595 to 660 Ceiling open dimension 525 Hanging bolt pitch Drain discharge port Hanging bolt M10 or W3/8 local arrange 220. 5 145. 5 Bottom face of ceiling
595 to 660 Ceiling open dimension
700 Panel external dimension
575 Unit external dimension
162 (diam. )
510 Hanging bolt pitch
177
97. 5
162 (diam. ) For branch duct knockout square hole 150 (diam. )
Electric parts box
320. 5
Refrigerant pipe (Liquid) 6. 4 (diam. ) For branch duct knockout square hole 150 (diam. ) Refrigerant pipe (Gas) 9. 5 (diam. ) (Gas) 12. 7 (diam. )
Wiring connection port
575 Unit external dimension
139. 5 190. 5
Bottom face of ceiling
(RAS-M10SMUV-E, M13SMUV-E, M10SMUCV-E, M13SMUCV-E) (RAS-M16SMUV-E, M16SMUCV-E)
7
EN
###RU###
###SW###
PORTUGUS
ESPAOL
Ceiling panel
ITALIANO
DEUTSCH
Indoor unit
Stand-up 627. 5 or less
Stand-up 850 or less
Space required for installation and servicing
FRANAIS
ENGLISH
Dimensional view
Ceiling opening and installation of hanging bolts
Evaluate and determine the piping and wiring requirements inside the ceiling prior to the hanging of the unit. After installation place of the indoor unit has been determined, create opening in ceiling and install the hanging bolts. For the ceiling opening size and pitch for hanging bolts refer to the dimensional drawing and the supplied installation pattern. Once the ceiling void has been created, ensure that the drain pipe, refrigerant pipes, inter-connecting wires and all control wires are in place prior to installing the actual indoor unit. Hanging bolt Nut M10 or W3/8 M10 or W3/8 4 pieces 12 pieces
Please procure the hanging bolts and nuts for installation of the indoor unit at local site.
How to use the supplied installation pattern
The installation pattern is enclosed within the packaging of the air conditioner. Existing ceiling void Use the pattern to determine the position and size of the opening and location of the hanging bolts. New ceiling void Use the pattern to determine the position of the new ceiling opening. Cut off the outside of the pattern according to size of the ceiling opening. (There is a slit on the standard opening size section. ) Install the indoor unit after installation of the hanging bolts. [. . . ] Setting the unit Remove the cover of the electric parts box by taking off the mounting screws (3 positions) and pushing the hooking section. (The cover of the electric parts box remains hanged to the hinge. ) There are the selector switches (SW02) on the P. C. No. 4 of the selector switches (SW02) is provided to select the switch of the remote controller. (OFF: A setting, ON: B setting)
"B" setting
"A" setting
Check whether the changed remote controller can operate the indoor unit or not.
Auto restart setting
This product is designed so that, after a power failure, it can restart automatically in the same operating mode as before the power failure.
INFORMATION
How to set the Auto Restart Remove the cover of the electric parts box by taking off the mounting screws (3 positions) and pushing the hooking section. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA USB 2.0 PORT REPLICATOR II
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA USB 2.0 PORT REPLICATOR II will begin.