User manual TOSHIBA RAS-10SKV-E SERVICE MANUAL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA RAS-10SKV-E. We hope that this TOSHIBA RAS-10SKV-E user guide will be useful to you.
You may also download the following manuals related to this product:
TOSHIBA RAS-10SKV-E (436 ko)
Manual abstract: user guide TOSHIBA RAS-10SKV-ESERVICE MANUAL
Detailed instructions for use are in the User's Guide.
[. . . ] SVM-07008-1
SERVICE MANUAL
AIR CONDITIONER
SPLIT WALL TYPE
RAS-10SKV-E / RAS-10SAV-E RAS-10SKV-A / RAS-10SAV-A
Revised May, 2007
FILE NO. SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REFRIGERANT R410A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Hi-POWER OPERATION To automatically control room temperature and airflow for faster cooling or heating operation (except in DRY and FAN ONLY mode) Press HI-POWER : Start and stop the operation.
6. ECO OPERATION To automatically control room to save energy (except in DRY and FAN ONLY mode) Press ECO : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/ hour for 2 hours (maximum 2 degrees increase). TEMPORARY OPERATION In case of the misplaced or discharged remote control · Pressing the RESET button, the unit can start or stop without using the remote control. · Operation mode is set on AUTOMATIC operation, preset temperature is 24°C and fan operation is automatic speed. TIMER OPERATION
Setting the ON Timer Setting the OFF Timer Press Press Press
OFF
1 2 3
Press Press Press
ON
: Set the desired ON timer. : Set the timer.
SET
SET
CLR
CLR
Everyday timer allows the user to set both the ON & OFF timers and will be activated on a daily basis. Setting Everyday Timer
1
Press
ON
: Set the ON timer.
3
Press
SET
.
2
Press
OFF
: Set the OFF timer.
4
Press button during the ( or ) mark flashing.
SET
· During the every day timer is activation, both arrows ( or ) are indicated. Note: · Keep the remote control in accessible transmission to the indoor unit; otherwise, the time lag of up to 15 minutes will occur. · The setting will be saved for the next same operation.
44
FILE NO. The setting will be memorized by the unit for future operation (except air flow direction). AUTO RESTART OPERATION To automatically restart the conditioner after the power failure (Power of the unit must be on. ) Setting 1. Press and hold the RESET button on the indoor unit for 3 seconds to set the operation. (3 beep sound and OPERATION lamp blink 5 time/sec for 5 secpmds) · Do not operate ON timer and OFF timer. Press and hold the RESET button on the indoor unit for 3 seconds to cancel the operation. QUIET OPERATION To operate at super low fan speed for quiet operation (except in DRY mode) Press QUIET : Start and stop the operation.
Note: Under certain conditions, QUIET operation may not provide adequate cooling or heating due to low sound features. COMFORT SLEEP OPERATION To save energy while sleeping, automatically control air flow and automatically turn OFF. Press COMFORT SLEEP : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: The cooling operation, the set temperature will increase automatically 1 degree/hour for 2 hours (maximum 2 degrees increase). SLEEP TIMER OPERATION To start the sleep timer (OFF timer) operation Press SLEEP : Select 1, 3, 5 or 9 hrs for OFF timer operation.
- 45 -
FILE NO. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pressing the
1. Transmission mark This transmission mark indicates when the remote controller transmits signals to the indoor unit. (AUTO : Automatic control, A : Auto changeover : Cool, : Dry, : Heat) control, 3. AUTO or five fan speed levels (LOW , LOW+ , MED , MED+ HIGH ) can be shown. [. . . ] 6) Cut the motor lead at the point which is 100 mm apart from the connector toward the fan. 7) Use the connector used for the inverter, and pinch the lead wires using the closed end splice. 5) Remove the terminal cover of the compressor, and disconnect the lead wire of the compressor thermo and the compressor from the terminal. (ST1T 4 x 10 s 2 PCS. ) Remarks
Fan motor
Fan motor Propeller fan
Closed end splice
10 0
Flange nut
, ,
Compressor
Compressor
. . .
Reactor
Reactor
86
FILE NO. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA RAS-10SKV-E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA RAS-10SKV-E will begin.