User manual TOSHIBA DRWST-50A51A
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA DRWST-50A51A. We hope that this TOSHIBA DRWST-50A51A user guide will be useful to you.
Manual abstract: user guide TOSHIBA DRWST-50A51A
Detailed instructions for use are in the User's Guide.
[. . . ] TEC
TEC Drawer Unit
Owner's Manual
Original Jul. , 1996 (Revised )
DRWST-50A/51A SERIES
Document No. EO1-19023
Table of Contents
TEC CORPORATION
l Request Regarding Maintenance
H Utilize our maintenance services. [. . . ] 2) Finish by wiping the machines off with a dry cloth.
- VIII -
DRWST-5OA61
EOl-19023 A SERIES
TABLE OF CONTENTS
Page . INTRODUCTION
Thank you for purchasing the TEC DRWST-5OA/51A Series Remote Drawer. This drawer can be connected to various terminals including the ST-5500, FF-5501, etc. , which has been developed as a high-grade POS terminal. Large Type Drawer is provided for the DRWST50A Series and SP Type Drawer for the DRWST-51A Series. The Large Type Drawer has the holes for attaching the LIUST-51 (Pole Type) and the printer I/F cable.
1. I Precautions
1) 2) Do not subject the equipment to sudden shocks.
The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild detergent solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic covers. DO NOT POUR WATER directly onto the drawer and NEVER IMMERSE THE DRAWER IN WATER.
3) 4) 5) 6)
Avoid using in locations subject to vibration and direct sunlight. Be sure to install the equipment Be sure to use the equipment relative humidity. within the proper ranges of power, current consumption, temperature and
7) 8)
Do not roughly open or close the drawer. APPEARANCE
l
AND NOMENCLATURE
Large Type (DRWST-5OA)
Through-hole for the printer I/F Cable Hqle for attaching the LIUST-51 (Pole Type) \ \
rawer Cable -Cash Box I Media \
slot
\ Drawer Release Lock
-l-
DRWST-50A151A
EOl -19023 SERIES
l
SP Type (DRWST-51 A)
Media
Slot
\
\
D-Cap
Accessory Parts
Drawer Release Key (2 PCS. )
Cash Drawer Cover Key (2 PCS. )
3.
INSTALLING
WA RMNG Turn the POWER
THE DRAWER
SWlTCH
to OFF of Main Control Unit before connecting
the cab/es.
When connecting the first drawer to the ST-5500 terminal, to DRWlT of Main Control Unit.
connect the connector of the Drawer Cable
Drawer
Cable
-2-
DRWST-50N51A
EOl -19023 SERIES
4. HANDLING
l
OF THE DRAWER
Manual cash drawer releasing Opening the Drawer Usually, the drawer is released automatically on finalizing each transaction. In the event of a power failure or other troubles, the drawer can be opened in the following manner.
n
1)
Insert the Drawer Release Key into the Drawer Release Lock and turn the key clockwise 45 degrees. [. . . ] 3
-3-
DRWST-5ON5iA
EOl -19023 SERIES
l
Process
of cables of each module
(DRWST-MA)
If the DRWST-5OA Drawer (large type) is used, pass the cables through the space at the rear side of the drawer by removing the drawer back cover.
Drawer
5. SPECIFICATIONS
Size Large Type: SP Type : 510 mm (including 460 mm (including 12Kg 10Kg (W) x 455 mm (D) x 115 mm (H) the rubber feet) (W) x 400 mm (D) x 115 mm (H) the rubber feet)
Weight
Large Type : SP Type : 0. 2 A Max.
Power Consumed interface with the Control Unit
Drawer open signal and drawer detection signal (Power is supplied by the Control Unit : DC + 24 V) 0°C to 40°C 10% to 90% RH (with non condensation 1. 6 m allowed)
Ambient Temperature Relative Humidity Cable Length
-4-
TEC TEC -CORPORATION
3C*
PRINTED EOl-19023 IN JAPAN [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA DRWST-50A51A
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA DRWST-50A51A will begin.