Detailed instructions for use are in the User's Guide.
[. . . ] · This TV set may be used only with Toshiba stand listed on page 32. Use with other stands may result in instability, causing possible injury. · Place the TV far enough away from the walls to allow proper ventilation. This will prevent the TV from overheating and avoid possible damage to the TV. [. . . ] If the VCR or converter does not respond, repeat steps 14 using another code. If the VCR or converter does not respond to a different code, you will need to use the remote control that came with your VCR or converter.
3 4
Basic Operation
ENT
VOL
MENU/ ENTER
VOL
Advanced Operation
CH TV CABLE VCR
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
5
Set the TV/CABLE/VCR switch to TV to control the TV. For future reference, write down the code(s) you used: VCR Code Cable TV Converter Code
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
LOCATE SWAP
Reference Section
Note: You must reprogram the remote control when you change the batteries. These VCRs have a switch labeled "VCR1/VCR2. " If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position ("VCR1" or "VCR2") and reprogram the remote control.
11
Set up
Programming the remote control for use with a non-Toshiba VCR or cable TV converter (continued)
In some rare cases, you may not be able to operate your non-Toshiba equipment with your TV remote control. Your other equipment may use a code that is not recognized by the TV remote control. If this happens, you will need to use the remote control provided with your other equipment.
Preparation
VCR code table
BRAND NAME CODE NUMBER BRAND NAME CODE NUMBER BRAND NAME CODE NUMBER
Adventura . . . . . . . . . . . . . . . 019, 021, 056, 062, 080, 087, 140, 203, 227, 228, 230, 231, 297, 313, 314, 380, 498 Fisher . . . . . . . . . . . . . . . . . . . . . . 019, 054, 056, 065, 066, 067, 081, 085, 123, 259 Ricoh . . . . . . . . . . . . . . . . . . . . . . 052, 053, 058
Reference Section
Advanced Operation
Basic Operation
12
Set up
Cable TV converter code table
BRAND NAME CODE NUMBER BRAND NAME CODE NUMBER
Preparation
ABC . . . . . . . . . . . . . . . . . . . . . . . . 419
Basic Operation Advanced Operation Reference Section
13
Set up
Menu function (general instructions)
To adjust any TV feature, you must use the menu function. You can access the menus using the buttons on the TV or remote control. If in doubt, consult your cable company.
17
Set up
Watching TV programs or videotapes
CHANNEL t/s
Selecting a TV channel
Select a channel in one of the following two ways:
G
MENU
TV / VIDEO
VOLUME
CHANNEL
Preparation
POWER
Scan through the programmed channels in numerical sequence: Press CHANNEL s to select the next higher channel. Continue pressing CHANNEL s or t to select the next programmed channel. Select a channel directly: Press the Channel Number buttons (09 and 100). To select channel 125, press 100--2--5.
G
MENU
T/S
t/s
Basic Operation
TV/VIDEO
RECALL
MUTE
POWER
RECALL
If you cannot select a specific channel, make sure the TV/CABLE function is set correctly (see page 16).
o
1 4 7
100
2 5 8 0
CH
3 6 9
CH RTN
Selecting the video input source
Channel Number
Advanced Operation
You can use the TV/VIDEO button to view a signal coming from other video equipment connected to your TV (such as a VCR or DVD player). See "Connecting your TV" on page 5.
Note: To operate your video equipment properly, refer to the instructions provided with the video equipment.
ENT
1
VOL
Turn the TV and video equipment on. The selected source will be displayed in purple.
VOL
MENU/ ENTER
CHANNEL s/t
2
Reference Section
CH TV CABLE VCR
TV VIDEO1 VIDEO2
TO SELECT PUSH TV/VIDEO
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
EXIT TV/VIDEO
REC
TV/VCR
STOP
3
Operate the video equipment normally.
STILL SOURCE SLOW PAUSE REW PIP CH
LOCATE SWAP
About the DEMO (demonstration) mode
When the DEMO mode is activated, your TV automatically displays a variety of its on-screen menus and special features. To start the demo: 1 Press MENU until the Option menu is displayed on-screen. The onscreen demo starts after about 15 seconds.
LANGUAGE:[ENGLISH]FRANCAIS ESPANOL DEMO: [START]STOP C. CAPT: C1 C2 C3 C4 T1 T2 T3 T4[OFF]
MOVE[t s] SELECT[T S]
To stop the demo: 1 Press EXIT or RECALL on the Remote, or select STOP in the menu.
18
Convenient remote control functions
Displaying on-screen information
RECALL
RECALL MUTE
Set up
POWER
Press RECALL to display the following information on-screen:
G
o
MUTE
1 4 7
100
2 5 8 0
CH
3 6 9
CH RTN
G
Channel Number
G
Channel number or VIDEO mode selected (see page 18) Stereo or SAP audio status (see pages 2425) V-CHIP rating (see pages 2831)
SEE TRO SP A CPIN ATO TX ET
T-G VP L V
Preparation
CBE AL
4
Muting the sound
CH RTN
ENT
VOL
MENU/ ENTER
VOL
Press MUTE to turn off the sound. To restore the sound, press MUTE again.
MUTE
Basic Operation
CH TV CABLE VCR
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
REC
TV/VCR
STOP
Note: When MUTE is pressed, the Closed Captioned feature "C1" is activated ("MUTE" on the screen display will disappear). (This feature functions only when the Closed Caption mode is set to OFF. )
Advanced Operation
STILL SOURCE SLOW PAUSE REW PIP CH
LOCATE SWAP
Changing quickly between two channels
The CH RTN function allows you to switch back and forth between the current and previous channels without entering the channel number each time.
Reference Section
To operate the CH RTN function:
1 2 3
Select the first channel you want to view. The previous channel will return.
(Current channel) 4
CH RTN
(Previous channel) 6
Each time you press CH RTN, the TV will switch back and forth between the two channels.
19
Set up
Adjusting the picture
You can adjust the picture quality (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR and TINT) to suit your taste.
MENU
TV / VIDEO
VOLUME
CHANNEL
Adjusting the picture quality
1
Preparation
POWER
Press MENU until the Picture 1 menu is displayed on-screen. [. . . ] TACP/THI Authorized Service Center personnel will come to your home when warranty service is required. Depending on the type of repair required, either the service will be performed in your home or the set will be taken to the TACP/THI authorized service center for repair and returned to your home at no cost to you. Limited Two (2) Year Warranty of Picture Tube TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for a period of two (2) years after the date of original retail purchase. During this period, TACP and THI will repair or replace a defective picture tube at their option, with a new or refurbished picture tube, without charge to you, except that, if a defective picture tube is replaced after one (1) year from the date of the original retail purchase, you pay labor charges involved in the replacement. [. . . ]