User manual TOSHIBA 32A50
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA 32A50. We hope that this TOSHIBA 32A50 user guide will be useful to you.
Manual abstract: user guide TOSHIBA 32A50
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER'S MANUAL
Color Television
TM
27A50 32A50 36A50
© TOSHIBA CORPORATION, 2000
Reference Section
Advanced Operation
Basic Operation
Preparation
Set up
Set up
Preparation
Dear Customer Congratulations!This manual will help you use the many exciting and useful features to make your TV viewing more enjoyable than ever before. Before operating your TV set, please read all these safety and operating instructions completely and then retain for future reference.
Customer's Record You will find the model number and serial number on the back of your TV set. Refer to them whenever you call upon your TOSHIBA dealer regarding this product. [. . . ] (VHF channels 2 through 13 and UHF channels 14 through 69) CABLE: Cable TV signals. (Cable channels 1 through 125)
TIMER: 0 MIN TV/CABLE: TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
o
CH PROGRAM function
1 4 7 2 5 8 0
CH
3 6 9
CH RTN
Channel Number
1 2
Press MENU until the Setup menu is displayed on the screen. Press s or t repeatedly until "CH PROGRAM" is displayed in purple.
Reference Section
TIMER: 0 MIN TV/CABLE: TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] START[T S]
100
ENT
T/S
MENU
VOL
MENU/ ENTER
VOL
CH TV CABLE VCR
s/t CHANNEL s/t
3
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
Press T or S to start channel programming. The TV will automatically cycle through all the TV or CABLE channels depending on the mode selected, and store active channels in the channel memory.
CH PROGRAM CABLE
24
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
4
LOCATE SWAP
When channel programming is complete, you will see the message at the right.
CH PROGRAMMING COMPLETED CABLE 4
5
Press CHANNEL s or t to make sure the channel programming has been done properly.
16
ADD/ERASE function
After performing the CH PROGRAM function, you can add or erase specific channels.
CABLE channel reference chart
Number on this TV Corresponding CABLE channel Number on this TV Corresponding CABLE channel
5 6
5(A-7) 6(A-6) A B C
68 69
68 69
2 3
. . . . . . . . . . . . . . . . . . . . .
MOVE[t s] SELECT[T S]
15 16
92 93 94 95 96 97 98 99 100 101 102
. . . . . . . . . . . . . . . . . . . . .
92 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102
. . . . . . . . . . . . . . . . . . . . .
MOVE[t s] SELECT[T S]
35 To add the channel Press the button until "ADD" is displayed in purple indicating that the channel has been memorized. 36
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
V W AA BB
. . . . . . . . . . . . . . . . . . . . .
37 38
. . . . . . . . . . . . . . . . . . . . .
5
Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.
60 61 62 63 64 65 66
XX YY ZZ AAA BBB 65 66
123 124 125
123 124 125
The above chart is typical of many cable system channel allocations. If in doubt, consult your cable company.
17
Reference Section
Advanced Operation
Press T or S : To erase the channel Press the button until "ERASE" is displayed in purple indicating that the channel has been erased from the memory.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: ADD[ERASE] V-CHIP CONTROL FAVORITE CH
. . . . . . . . . . . . . . . . . . . . .
34
. . . . . . . . . . . . . . . . . . . . .
4
U
Basic Operation
Press s or t repeatedly until "ADD/ ERASE" is displayed in purple.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH
14
. . . . . . . . . . . . . . . . . . . . .
Press MENU repeatedly until the Setup menu is displayed on the screen.
Preparation
1
Select the channel you want to erase using the CHANNEL L or M button, or select the channel you want to add using the Channel Number buttons.
1
A-8
67
67
Set up
Set up
Watching TV Programs or Video input
CHANNEL t/s
Selecting the TV channels
Select a channel in one of the following two ways.
G
To scan the memorized channels in numerical sequence
Press CHANNEL s to select the next higher channel. Press the button again to select the next memorized channels.
MENU
TV / VIDEO
VOLUME
CHANNEL
Preparation
POWER
G
MENU
T/S
t/s
Basic Operation
TV/VIDEO
To select a channel directly Press the Channel Number buttons (0-9 and 100). To select channel 4, press "4" (or press "0", "4"). To select channel 125, press "100", "2", "5" in sequence. If you cannot select certain channels, either TV (off the air) or CABLE channels Check if the TV/CABLE function is properly set. See page 16.
RECALL
MUTE
POWER
RECALL
o
Selecting the video input source
1 4 7
100
2 5 8 0
CH
3 6 9
CH RTN
Advanced Operation
Channel Number
You can use the TV/VIDEO button to view signal coming from other devices, such as VCR's or video disc players that may be connected to your TV. (See "Connecting Your TV" on page 5. )
Note: To operate your TV and video equipment properly, refer to the instructions
furnished with the video equipment.
ENT
1 2
VOL
Turn the TV and the video equipment ON. Press TV/VIDEO on the Remote Control or on the TV to select "VIDEO 1" or "VIDEO 2". The selected source will be displayed in purple.
MENU/ ENTER
VOL
CHANNEL s/t
Reference Section
CH TV CABLE VCR
TV VIDEO1 VIDEO2
TO SELECT PUSH TV/VIDEO
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
EXIT TV/VIDEO
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
3
Operate the video equipment normally.
LOCATE SWAP
About the Demonstration Mode
When this function is activated, your TV will automatically display a variety of its on-screen menus and special features. This function is provided for demonstration purposes only.
1 2
Press MENU, then s or t until "DEMO" in the Option menu is displayed in purple. The on-screen demonstration will start after about 15 seconds.
LANGUAGE:[ENGLISH]FRANCAIS ESPANOL DEMO: [START]STOP C. CAPT: C1 C2 C3 C4 T1 T2 T3 T4[OFF]
MOVE[t s] SELECT[T S]
To stop the demonstration Press EXIT or RECALL on the Remote or select "STOP" in the menu.
18
Displaying on-screen information
RECALL
RECALL MUTE
POWER
Press RECALL to display the following onscreen information.
G G G
MUTE
1 4 7
100
2 5 8 0
CH
3 6 9
CH RTN
CABLE
4
Channel Number
Muting the sound
CH RTN
ENT
VOL
MENU/ ENTER
VOL
CH TV CABLE VCR
MT UE
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
LOCATE SWAP
Changing quickly between two channels
Press CH RTN to return to the last channel viewed. This allows you to view two programs without entering an actual channel number each time.
To operate this function
1 2 3
Select the first channel you want to view.
(Viewing channel)
Select the other channel with the Channel Number buttons.
Press CH RTN. The previous channel will return.
(Previous channel)
4
Each time you press CH RTN, the TV will switch back and forth between the two channels.
6
19
Reference Section
Advanced Operation
Note: When the MUTE button is pressed, the ClosedCaptioned feature "C1" is activated. ("MUTE" on the screen display will disappear. ) To deactivate, press the MUTE button again. (This feature only functions when the Closed Caption mode is set to "OFF". )
Basic Operation
Press MUTE to mute the sound. To restore the sound, press MUTE again.
Preparation
o
Channel number or VIDEO mode selected Stereo or SAP audio status V-CHIP rating
STEREO SAP CAPTION TEXT
TV-PG L V
Set up
Convenient Remote Functions
Set up
Adjusting the Picture
You can adjust the picture quality (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR and TINT) to suit your taste.
MENU
TV / VIDEO
VOLUME
CHANNEL
Adjusting the picture quality
1
Preparation
POWER
Press MENU repeatedly until the Picture 1 menu is displayed on the screen. Press s or t until the item you want to adjust is displayed in purple.
2
MENU
CONTRAST BRIGHTNESS SHARPNESS COLOR TINT RESET MOVE[t s] ADJUST[T S]
+ + + + +
T/S
t/s
3
Basic Operation
Press T or S to adjust the level. [. . . ] Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. You should complete and mail the enclosed Demographic card within ten days after you, or the person who has given you this product as a gift, purchased this product. This is one way to enable TACP/THI to provide you with better customer service and improved products. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA 32A50
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA 32A50 will begin.