User manual TOSHIBA 32A41
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TOSHIBA 32A41. We hope that this TOSHIBA 32A41 user guide will be useful to you.
Manual abstract: user guide TOSHIBA 32A41
Detailed instructions for use are in the User's Guide.
[. . . ] Set up Preparation
OWNER'S MANUAL
Color Television
®
Basic Operation Advanced Operation Reference Section
32A41 36A41
© 2001 TOSHIBA CORPORATION All Rights Reserved.
Owner's Record The model number and serial number are on the back of your TV. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV. Model number: Serial number:
Important Information
Set up
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Precautions
Installing your TV
· Place the TV on the floor or on a sturdy platform. If you install the TV on a soft floor, make sure that the floor is not damaged by the weight of the TV. [. . . ] Model 32A41 is used for illustration purposes.
Preparation
MENU
TV / VIDEO
VOLUME
CHANNEL
The following are general instructions for using the menu system:
1
POWER
Repeatedly press MENU to select a menu (Picture, Audio, Setup, or Option, as shown below). The menus automatically disappear from the screen if no adjustments are made within 15 seconds. To clear an on-screen menu instantly, press EXIT on the remote control.
2
MENU
T/S
t/s
Basic Operation
3 4
RECALL
MUTE
POWER
RECALL
1
o
Picture 1
3 6 9
CH RTN
CONTRAST BRIGHTNESS SHARPNESS COLOR TINT RESET + + + + +
2 5 8 0
CH
Advanced Operation
4 7
100
Picture 2
ENT
COLOR MOVE[t s] ADJUST[T S] TEMPERATURE:[COOL]MEDIUM WARM PICTURE PREFERENCE: [NORMAL]THEATER MEMORY MTS: MOVE[t s] SELECT[TBASS S] TREBLE BALANCE SURROUND [STR]SAP MONO [ON]OFF
Audio
T/S
Reference Section
VOL
MENU/ ENTER
VOL
s/t
+ + +
Setup
MENU
TV CABLE VCR
CH
TIMER: 0 MIN MOVE[t s] SELECT[T TV/CABLE: S] TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S] DEMO: C. CAPT:
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
EXIT
Option
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
LANGUAGE:[ENGLISH]FRANCAIS ESPANOL START[STOP] C1 C2 C3 C4 T1 T2 T3 T4[OFF]
LOCATE SWAP
MOVE[t s] SELECT[T S]
Note:
The T/S buttons function as VOLUME T/S buttons when no menu is on-screen. The s/t buttons function as CHANNEL s/t buttons when no menu is on-screen. Models 32A41 and 36A41 do not have PIP features.
14
First-time operation
VOLUME T/S
Set up
Turning the TV set on
1
MENU TV / VIDEO VOLUME CHANNEL
Set the TV/CABLE/VCR switch on the remote control to TV. To turn the TV off, press POWER again.
TV 4
2
POWER
Preparation
MENU
T/S
t/s
POWER
3
Press VOLUME T/S to adjust the volume. To decrease the volume, press T .
Basic Operation
VOLUME
TO CONTROL PUSH VOL
+
RECALL
MUTE
POWER
o
POWER
3
1 4 7
100
2 5 8 0
CH
Advanced Operation
6
Selecting the on-screen display language
9
CH RTN
1
s/t
ENT
Press MENU until the Option menu is displayed on-screen. Press s or t repeatedly until "LANGUAGE" is displayed in purple.
2
LANGUAGE:[ENGLISH]FRANCAIS ESPANOL DEMO: START[STOP] C. CAPT: C1 C2 C3 C4 T1 T2 T3 T4[OFF]
VOL
MENU/ ENTER
VOL
MOVE[t s] SELECT[T S]
Reference Section
CH TV CABLE VCR
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
T/S VOLUME T/S
3
Press T or S until your desired language is displayed in purple. For example, if you select FRANCAIS, the menu display language changes to French.
REC
TV/VCR
STOP
LANGUAGE: ENGLISH[FRANCAIS] ESPANOL DEMO: MARCHE[ARRET] S. TITRA: C1 C2 C3 C4 T1 T2 T3 T4[ARRET]
STILL SOURCE SLOW PAUSE REW PIP CH
BOUGER[t s] CHOISIR[T S]
LOCATE SWAP
Understanding the Auto Power Off feature
The TV automatically turns off after 15 minutes if it is tuned to a vacant channel or a station that has completed its broadcast for the day. This feature does not operate when the TV is in VIDEO mode.
Understanding the Last Mode Memory feature
If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns the TV on when the power is resupplied. If the power is going to be off for a long time and you are going to be away from your TV, unplug the power cord to prevent the TV from turning on in your absence.
15
Set up
Programming the channel memory
The channel memory is the list of TV channels your TV stops on when you press CHANNEL L/M. First, use the TV/CABLE and CH PROGRAM functions (below) to program all active channels in your area into the channel memory. Then use the ADD/ERASE function (page 17) to add/erase individual channels in the memory.
CHANNEL t/s
Preparation
TV/CABLE function
1
MENU TV / VIDEO VOLUME CHANNEL
Press MENU until the Setup menu is displayed on-screen. Press s or t until TV/CABLE is displayed in purple.
2
POWER
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
Basic Operation
3
MENU
T/S
t/s
Press T or S until the mode that corresponds to your TV signal system displays in purple. TV: TV broadcast signals (VHF channels 2 through 13 and UHF channels 14 through 69)
TIMER: 0 MIN TV/CABLE: TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
Advanced Operation
RECALL
MUTE
POWER
CABLE: Cable TV signals (Cable channels 1 through 125)
o
1 4 7
2 5 8 0
CH
3 6 9
CH RTN
Channel Number
CH PROGRAM function
Use the CH PROGRAM function to automatically add all active channels to the channel memory.
Reference Section
100
ENT
1 2
s/t CHANNEL s/t
Press MENU until the Setup menu is displayed on-screen. Press s or t repeatedly until "CH PROGRAM" is displayed in purple.
T/S
MENU
VOL
MENU/ ENTER
VOL
TIMER: 0 MIN TV/CABLE: TV[CABLE] CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] START[T S]
CH TV CABLE VCR
EXIT
FAV CH TV/VIDEO A
PLAY PIP FF
3
REC
TV/VCR
STOP
STILL SOURCE SLOW PAUSE REW PIP CH
LOCATE SWAP
Press T or S to start channel programming. The TV automatically cycles through all the TV or CABLE channels (depending on the mode selected), and stores the active channels in the channel memory. When channel programming is done, you will see the message, "Ch Programming Completed. " Press CHANNEL s or t to scan through the programmed channels.
4 5
CH PROGRAM CABLE
24
CH PROGRAMMING COMPLETED CABLE 4
16
Set up
ADD/ERASE function
After using the CH PROGRAM function to automatically program channels into the channel memory, you can use the ADD/ERASE function to manually add or erase individual channels, as follows:
CABLE channel reference chart
Number on this TV Corresponding CABLE channel Number on this TV Corresponding CABLE channel
1 5 6
A-8 5(A-7) 6(A-6) A B C
67 68 69
67 68 69
Preparation
1
Select the channel you want to add or erase. If you are adding a channel, you must use the Channel Number buttons to select the channel.
. . . . . . . . . . . . . . . . . . . . .
2 3
Press MENU until the Setup menu is displayed on-screen. Press s or t until ADD/ERASE is displayed in purple.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
14 15 16
. . . . . . . . . . . . . . . . . . . . .
Basic Operation
92 93 94 95 96 97 98 99 100 101 102
. . . . . . . . . . . . . . . . . . . . .
92 93 94 A-5 A-4 A-3 A-2 A-1 100 101 102
. . . . . . . . . . . . . . . . . . . . .
4
To add the channel: Press T or S until ADD is displayed in purple, indicating that the channel has been added to the channel memory. To erase the channel: Press T or S until ERASE is displayed in purple, indicating that the channel has been erased from the channel memory.
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: ADD[ERASE] V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
. . . . . . . . . . . . . . . . . . . . .
34 35 36
. . . . . . . . . . . . . . . . . . . . .
U V W AA BB
. . . . . . . . . . . . . . . . . . . . .
Advanced Operation
TIMER: 0 MIN TV/CABLE: [TV]CABLE CH PROGRAM ADD/ERASE: [ADD]ERASE V-CHIP CONTROL FAVORITE CH MOVE[t s] SELECT[T S]
37 38
. . . . . . . . . . . . . . . . . . . . .
Reference Section
5 6
Repeat steps 14 for other channels. Press s or t to select another item in the menu, or press EXIT on the remote control to return to viewing.
60 61 62 63 64 65 66
XX YY ZZ AAA BBB 65 66
You have now finished programming the channel memory.
123 124 125
123 124 125
The above chart is typical of many cable system channel allocations. [. . . ] Rental Units The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the rental firm, whichever comes first. Commercial Units Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture tube. Owner's Manual and Demographic Card You should read this owner's manual thoroughly before operating this product. You should complete and mail the enclosed Demographic card within ten days after you, or the person who has given you this product as a gift, purchased this product. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TOSHIBA 32A41
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TOSHIBA 32A41 will begin.