User manual THEBEN PRASENZLIGHT 180 SCHEMA

[. . . ] For example during office hours normal temperature or (energy saving program). Example: daily from 6°° hours to 8°° hours normal program r Push all segments from 600 hours to 7. [. . . ] The product type RAM 722 / 782 can be switchted from day to week program or vice versa. -> Turn the big hand until the groove in the blue and the groove in the green ring cover each other. Example for a week program with normal temperature r from: Mon - Fri: 4 AM - 8 AM and 4 PM - 8 PM/ Sat: 8 AM - mid-night/ Sun: 8 AM - 8 PM Starts normal program r and ends the energy saving program Starts energy saving program m and ends the normal pogram Insert in each case from Mon (I) to Fri (V): a red tappet at 4 AM and blue tappet at 8 AM a red tappet at 16 PM and blue tappet at 20 PM A red tappet at 8 AM and blue tappet at mid-night a red tappet at 8 AM and blue tappet at 20 PM All tappets must be pressed right down until the boss engages. The connection and the installation of electrical products may be effected only by a qualified electrician. If clock thermostats are used in a circuit with other products attention must be given to ensure that the whole system does not cause radio interference. Ensure that when installing and dismantling the clock thermostat that the voltage in the connecting lead is switched off. Follow the connection diagram as shown on the product after removing from the base. Connect only with approved powercable from the connection terminals 10 and 11 to telephone switch. conseils securité commande téléfonique Le thermostat à horloge RAM 782 / 782s dispose de bornes pour le raccordement d'un contact téléfonique à distance. Le report à distance du signal transmis par téléphone permet de commuter l'appareil sur la températur confort, quelle que soit sa position à cet instant. Environmental information The equipment that you bought has required the extraction and use of natural resources for its production. It may content hazardous substances for the health and the environment. [. . . ] In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end life equipment in a sound way. [. . . ]