User manual TASCAM CD-BT2

[. . . ] » CD-BT2 Portable CD Bass Trainer D00997220A This device has a serial number on the rear panel. Serial number: __________________ OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS FOR U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] When the unit is operating, if you disconnect the power adapter or remove the batteries to turn the power OFF, your settings may not be saved. All the settings might even be initialized, reverting them to their default values. When using this player with batteries, the power turns OFF temporarily if you remove or connect the AC adapter. Turning the power ON and OFF Press and hold the POWER switch on the rear of the unit for about one second to turn its power ON. Release the button when the screen below appears on the display. 1 TASCAM CD-BT2 IMPORTANT and functions of parts Names SAFETY INSTRUCTIONS Control panel 2 TEMPO key Press this key to open the TEMPO CHANGE screen. You can change the playback tempo and turn the VSA function ON and OFF on this screen. (See "Changing the tempo" and "Changing the pitch with the tempo" on page 26. ) 3 KEY key Press this key to open the KEY & PITCH screen. (See "Changing only the pitch" on page 26. ) 4 BEE key Press this key to open the B. E. E screen. (See "Using the bass enhancement effect" on page 27. ) 5 EFFECT key Press this key to open the EFFECTOR screen. (See "Using built-in effects" on page 31. ) 6 TIME DISPLAY key Press this key to open the TIME DISPLAY screen, which shows the status of the CD during playback and other information. (See "TIME DISPLAY screen" on page 21. ) 7 LOOP key Turns the loop playback and repeat playback functions ON and OFF. When IN and OUT points are set, this key turns 1 TASCAM CD-BT2 1 Display Shows CD status during playback, device settings and other information. IMPORTANT functions of parts Names and SAFETY PRECAUTIONS loop playback ON and OFF. (See "Loop playback" on page 28 and "Repeat playback" on page 29. ) 8 IN/OUT key Use this key to set the loop playback IN and OUT points. Set and use the metronome and make various device settings on this screen. (See "Using the tuner" on page 35. ) q LEVEL key Press this key to open the LEVEL screen. Make independent adjustments to the input signal and CD playback volumes on this screen to change the mix balance. (See "Using a bass with the trainer" on page 30. ) w CURSOR (§, ¶, , ¥) keys Select among setting items on the screen with these keys. e VALUE (+, ­) keys Change the value of the item selected on the screen. r PHONES VOLUME (+, ­) keys Adjust the volume sent to your headphones using these keys. Press and hold this key to fast forward through a track that is playing or paused. Press and hold this key when the CD is stopped to automatically skip forward (increment) though the tracks. Press and hold this key to fast reverse through a track that is playing or paused. Press and hold this key when the CD is stopped to automatically skip backward (decrement) though the tracks. [. . . ] When ON, an image of a vibrating pitchfork appears on screen. tuning(1G, 2D, 3A, 4E, 5B). (The matching bass peg is also indicated at the right side of the screen. ) 3 Thebassistunedwhenthecenterofthemeteris highlighted. Thetuningproceduresarethesameas describedabovefortheAUTOmode. TASCAM CD-BT2 LEVEL Adjust the output sound level between 0 and 100 with the VALUE (­, +) keys. CALIB Set the standard frequency of middle A between 435 Hz and 445 Hz. This setting affects all tuner modes. IMPORTANT SAFETY INSTRUCTIONS Other functions Using a footswitch You can use a footswitch to control certain operations. [. . . ]