User manual SONY VPCEH12FX/W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPCEH12FX/W. We hope that this SONY VPCEH12FX/W user guide will be useful to you.


SONY VPCEH12FX/W : Download the complete user guide (2108 Ko)

Manual abstract: user guide SONY VPCEH12FX/W

Detailed instructions for use are in the User's Guide.

[. . . ] For customers in Europe and Australia Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ] ΍ Index to speaker parts Assist tweeter unit Main tweeter unit Front With the grille frame attached*1 Duct Rear Woofer unit Grille frame Terminals Enclosure  Setting the speaker   etting the speaker on the rack S   etting the speaker into the rack S Center speaker Center speaker  AV receiver connections Binding post AV receiver Speaker cords (not supplied)  Index to speaker parts Notes on usage  Do not touch the diaphragm of each speaker unit. Ώ The color and appearance (grain patterns) may vary among the enclosures because natural wood is used. Depending on lighting conditions, the enclosures may look different, but this does not indicate damage. Ώ Do not put any object or your hand into either of the ducts located on the rear of the enclosure. Ώ If there is a foreign object in the duct, do not attempt to take it out by yourself. *1 Before attaching the grille frame, confirm its correct mounting orientation. If the grille frame is protruding outward (it will not come off), push it all the way in. Attaching the grille frame is recommended even when not using the speaker in order to protect them from damage. The speaker can be enjoyed with the grille frame attached, but superior performance can be achieved by removing the grille frame. )  Wipe smudges such as fingerprints or oil spots with the supplied cleaning cloth carefully. Ώ When the smudges are hard to remove, wipe them off with a soft cloth soaked in soapy water, and wrung dry. Ώ The supplied cleaning cloth is washable and can be used repeatedly. To avoid damaging the speaker  Do not disassemble or modify the speaker units, network circuits, or the enclosure. Ώ If sound is distorted or noise occurs, amplifier power output may be overloading the speaker units. ΍ AV receiver connections Selecting the receiver/speaker cords Select a receiver (not supplied) and speaker cords (not supplied) meeting the following requirements. To avoid damaging the circuits Do not input the following signals continuously:  FM inter-station noise  High-frequency signals of electronic instruments  High output and high-frequency signals in the fast-forward and rewind modes of a tape recorder For selecting a receiver: The speaker impedance is designed as 4 ohms. Excessive sound volume may damage the speaker, so be aware of the position of the volume level knob on the receiver and avoid excessive input. Requirement for selecting speaker cords In order to output high-quality sound signals, use speaker cords of the minimum necessary length that are treated with either of the following two fittings at their ends:  With cable cores (less than 4. [. . . ] 5 mm (3/16 in) in diameter) bared by stripping the jacket to 10 mm (13/32 in) from each + and - end The bare cable core may become oxidized over time. In this case, reconnect the speaker cords after stripping the jacket to expose a fresh segment of cable core at each end. Ώ With spade plugs (more than 8 mm (11/32 in) in inner diameter, and less than 12 mm (1/2 in) in outer diameter) Connecting to the receiver Before connecting, turn off the receiver. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPCEH12FX/W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPCEH12FX/W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.