User manual SONY VPCEG18FX/P

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPCEG18FX/P. We hope that this SONY VPCEG18FX/P user guide will be useful to you.


SONY VPCEG18FX/P : Download the complete user guide (2108 Ko)

Manual abstract: user guide SONY VPCEG18FX/P

Detailed instructions for use are in the User's Guide.

[. . . ] 9 Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Installing the CPU and CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Installing the CPU Cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Four Channel Memory Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installing a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 DIMM Population Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 1-3-1 1-3-2 1-4 Installing the Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1-4-1 1-4-2 1-4-3 1-5 1-6 1-7 2-1 2-2 Back Panel Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Typically, the HBA is a storage controller located inside a server, desktop, rack or workstation computer that interfaces with Hard disk drives (HDDs) to store and retrieve data. 10 9 2 1 Pin No. 1 2 3 4 5 6 7 8 Definition SGPIO_SATA_DATAIN No Pin SGPIO_SATA_DATAOUT GND GND SGPIO_SATA_LOAD NC SGPIO_SATA_CLOCK 22) IPMB1 (IPMB Connector) 3 1 Pin No. 1 2 3 Definition SCL GND SDA Hardware Installation - 28 - 23) SKU_KEY1 (Intel C600 Series Upgrade Key) 1 3 Pin No. 1 2 3 Definition GND FM_PBG_DYN_SKU_KEY GND 24) JP1 (Chassis intrusion Header) Open: Normal operation (Default setting) Closed: Enable chassis intrusion alter. - 29 - Hardware Installation 25/26) J2/J3 (LAN3/LAN4 link/active LED Headers) J2 2 J3 1 Pin No. Definition 1 Active 2 Link 27) BMC_LED1 (BMC Firmware Readiness LED) State On Blinking Off Description BMC firmware is initial BMC firmware is ready System is powered off Hardware Installation - 30 - 28) BAT1 (Battery) The battery provides power to keep the values (such as BIOS configurations, date, and time information) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost. • Always turn off your computer and unplug the power cord before replacing the battery. Danger of explosion if the battery is replaced with an incorrect model. • Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. • When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery (the positive side should face up). • Used batteries must be handled in accordance with local environmental regulations. - 31 - Hardware Installation 1-7 Jumper Settings 4 3 2 1 5 6 7 8 9 10 5 1) 2) 3) 4) 5) CLR_CMOS1 PASSWORD1 BMC_FRB1 BIOS_WP1 BIOS_RVCR1 6) 7) 8) 9) 10) SSB_ME1 FLASH_DP1 S3_MASK SATA_DOM1 SATA_DOM0 Hardware Installation - 32 - 1) CLR_CMOS1 (Clearing CMOS Jumper) Use this jumper to clear the CMOS values (e. g. date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds. 1 1-2 Close: Normal operation (Default setting) 1 2-3 Close: Clear CMOS data. • Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. • After clearing the CMOS values and before turning on your computer, be sure to remove the jumper cap from the jumper. • After system restart, go to BIOS Setup Exit menu and load factory defaults (select Load Default Values) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup, " for BIOS configurations). 2) PASSWORD1 (Skip Supervisor Password Jumper) 1 1-2 Close: Normal operation. (Default setting) 1 2-3 Close: Skip supervisor password. - 33 - Hardware Installation 3) BMC_FRB3 (Force to Stop FRB3 Timer Jumper) 1 1-2 Close: Normal operation. (Pressing <Esc> can also carry out this task. )  Advanced  Chipset  Security  Server Management  Boot Options  Boot Manager  Exit BIOS Setup - 38 - 2-1 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter other sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu. Submenu Help While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the menu. Help for each item is in the Item Help block on the right side of the submenu. • When the system is not stable as usual, select the Load Default Values item to set your system to its defaults. • The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version. - 39 - BIOS Setup BIOS Information BIOS Version Memory Information Total Memory System Date Display version number of the BIOS setup utility. Determines how much total memory is present during the POST. Display the current accessing level information. System Time Access Level BIOS Setup - 40 - 2-2 Advanced Menu The Advanced menu display submenu options for configuring the function of various hardware components. Select a submenu item, then press Enter to access the related submenu screen. - 41 - BIOS Setup 2-2-1 PCI Configuration PCI Express Slot 1/2/3/4/5 I/O ROM When enabled, This setting will initialize the device expansion ROM for the related PCI-E slot. Enable/Disable onboard LAN1 device and initialize device expansion ROM. When this item is set to enabled, PCI bus parity error (PERR) is generated and is routed to NMI. [. . . ] CPU Socket 1: DDR3_P0_E0/DDR3_P0_E1/DDR3_P0_F0/DDR3_P0_F1/DDR3_P0_F0/DDR3_P0_F1 Status The size of memory installed on each of the DDR3 slots. - 59 - BIOS Setup 2-3-2 South Bridge Configuration PCH Information: Name/Stepping Information Displays the name and stepping information of the south bridge. SB Chipset Configuration PCH Compatibility RID Enable/Disable PCH Compatibility RID support. Defines the power state to resume to after a sys- tem shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. Default setting is Enabled. Restore on AC Power Loss (Note) SCU devices Onboard SAS oprom Onboard SATA RAID oprom (Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the last power state. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPCEG18FX/P




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPCEG18FX/P will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.