User manual SONY VAIO VPC-EC3DFX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VAIO VPC-EC3DFX. We hope that this SONY VAIO VPC-EC3DFX user guide will be useful to you.


SONY VAIO VPC-EC3DFX : Download the complete user guide (2670 Ko)

You may also download the following manuals related to this product:

   SONY VAIO VPC-EC3DFX QUICK START GUIDE (1311 ko)
   SONY VAIO VPC-EC3DFX DATASHEET (587 ko)
   SONY VAIO VPC-EC3DFX QUICK START GUIDE (1311 ko)
   SONY VAIO VPC-EC3DFX HARD DISK DRIVE REPLACEMENT INSTRUCTIONS (2120 ko)
   SONY VAIO VPC-EC3DFX RECOVERY, BACKUP AND TROUBLESHOOTING GUIDE (410 ko)
   SONY VAIO VPC-EC3DFX OPTICAL DISK DRIVE REPLACEMENT INSTRUCTIONS (1997 ko)

Manual abstract: user guide SONY VAIO VPC-EC3DFX

Detailed instructions for use are in the User's Guide.

[. . . ] Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. [. . . ] Use the AC adapter that comes with your notebook or the optional Sony adapter. 5 Connecting peripheral devices Sony Notebook User Guide nN 61 Disconnecting your computer from the port replicator To disconnect your computer from the port replicator, proceed as follows: 1 2 Turn off the computer and the connected peripherals. Pull the levers on each side of the port replicator to disconnect the computer from the port replicator. 3 Lift the notebook away from the port replicator. 4 Close the port replicator connector cover on the bottom of your computer. It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open, dust may get inside and damage the computer. To disconnect your port replicator completely from the mains voltage, unplug the AC adapter. Connecting peripheral devices Sony Notebook User Guide nN 62 Connecting an external display You can connect an external display to your notebook. For example, you can use your notebook with the following devices: Computer display (monitor); Multimedia computer display; TV; Projector. Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. On Windows® systems only, you can also use an external display to set up a virtual desktop. Connecting peripheral devices Sony Notebook User Guide nN 63 Connecting a computer display You can connect a computer display (monitor) either directly to your notebook or via the (optional) port replicator. To connect a computer display, proceed as follows: 1 2 Plug the display cable (1) (not supplied) into the monitor/VGA connector (2) port replicator. on the notebook or the If necessary, plug one end of the display's power cord (3) into the display, and the other end into an AC outlet. You cannot use the monitor connector on your notebook when the port replicator is connected to the notebook. Connecting peripheral devices Sony Notebook User Guide nN 64 Connecting a multimedia computer display You can connect the notebook to a multimedia computer display that includes built-in speakers and a microphone. To connect a multimedia computer display, proceed as follows: 1 Plug the display cable (1) into the monitor/VGA connector (2) on the computer or on the port replicator. 2 Plug the speaker cable (3) into the headphone connector (4) on the computer. 3 Plug the microphone cable (5) into the microphone connector (6) on the computer. Connecting peripheral devices Sony Notebook User Guide nN 65 Connecting a TV You can connect a TV to the notebook or to the optional port replicator. To connect an external mouse or keyboard, proceed as follows: 1 Plug the mouse cable (1) or the keyboard cable (2) with the keyboard connector (3) identified by MOUSE/KEYBOARD. symbol facing up into the PS/2 mouse/ See the manual supplied with your mouse or keyboard for more information on installation and use. Connecting peripheral devices Sony Notebook User Guide nN 71 Connecting a Universal Serial Bus (USB) device You can connect a USB device (for example, a mouse, floppy disk drive, keyboard, printer) to your computer. Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer. You may need to install software (device drivers) supplied with your USB device before using the USB device. There are 3 USB ports on your notebook (at the back, at the left, at the right) and 2 USB ports at the back of the optional port replicator. Connecting a USB mouse To connect a USB mouse, proceed as follows: 1 Choose the USB connector you prefer to use (at the back, left or right of the notebook (1) or the optional port replicator). You can use your USB mouse (3). The VAIO USB mouse software driver is preinstalled on your notebook, therefore, you only need to plug the USB mouse into the USB connector and you can start working. 2 Connecting peripheral devices Sony Notebook User Guide nN 72 Connecting a USB floppy disk drive As an optional extra, you can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive, proceed as follows: 1 2 Choose the USB connector you prefer to use. Your USB floppy disk drive is now ready for use. Connecting peripheral devices Sony Notebook User Guide nN 73 To remove a USB floppy disk drive, proceed as follows: If your computer is on, wait until the floppy drive LED indicator turns off and then unplug the USB cable. If the floppy disk drive is not removed properly, your system may crash and you may lose any unsaved data. If your computer is off, you can directly unplug the USB cable from the computer. Inserting a floppy disk To insert a floppy disk, proceed as follows: 1 2 Hold the disk (1) with the label side facing up. Gently push the disk into the drive (2) until it clicks into place. Connecting peripheral devices Sony Notebook User Guide nN 74 Removing a floppy disk To remove a floppy disk, proceed as follows: When you have finished using the floppy disk, wait until the LED indicator (1) turns off and then press the eject button (2) to remove the disk. Before pressing the eject button, make sure that the LED indicator is turned off. [. . . ] Your screen is made up of thousands of pixels, enabling you to see colours and pictures on it. The more pixels, the higher the resolution and the better the image quality. The port replicator contains ports that enable you to connect additional peripherals (such as a printer or a monitor) to your VAIO. A port replicator is similar to a docking station, but does not include additional slots for adding expansion boards or storage devices. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VPC-EC3DFX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VPC-EC3DFX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.