User manual SONY SELP28135G

[. . . ] Interchangeable Lens Objectif interchangeable 取扱説明書 Notes Set the iris click switch to OFF when shooting movies. (See illustration -a) If you change the aperture value while shooting a movie with the iris click switch set to ON, the sound of the iris ring will be recorded. Align a white dot on the tripod-mounting collar with the white line (collar index) on the lens to adjust the camera position precisely (2). ˎˎ Tighten the collar-locking knob firmly after the camera position is set. [. . . ] 5 Align the mark on the lens hood with the lens hood index on the lens, then insert the lens hood into the lens mount and rotate it clockwise until it clicks into place. To remove the lens hood Hold the PUSH (lens hood release) button down and turn the lens hood in the opposite direction of when attaching. 離目盛 15 絞り目盛  16 POWER ZOOMレバー 17 ZOOMスイッチ  18 ストラップ取り付け部 19 マウント標点  20 三脚座クランプノブ 21 手ブレ補正スイッチ 22 ズームピン 23 フードキャップ * 直接手で触れないでください。 定可能なカメラがあります。詳しくは、 カメラの取扱説明 書をご覧ください。 ズームリングの操作方向を変更する ズームリングの回転方向に対して、W/Tの割り当てを設  ピントを合わせる AF/MFモードで調節する 手動調節中にピントの自動調節機能を併用したい とき、 または動画撮影するときには、 フォーカスリ ングをの位置にセットします。 carrying a camera with the lens attached, always firmly hold both the camera and the lens. ˎˎ This lens is not water-proof, although designed with dust-proofness and splash-proofness in mind. *1 The values shown above for equivalent 35mm-format focal length are for Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor. *2 Angle of view 1 is the value for 35mm cameras, and angle of view 2 is the value for Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor. *3 Minimum focus is the distance from the image sensor to the subject. 6 8 22 16 11  IRIS LOCK  Attaching the strap Attach the strap to the lens when carrying the lens with the interchangeable lens camera (still) attached. ˎˎ To on the lens mechanism, the focal length may change with any change in shooting distance. Prevent the lens from dropping, be sure to attach the strap properly so that the strap will not come loose from the lens. Included items: Lens (1), Rear lens cap (1), Lens hood (1), Hood cap (1), Lens case (1), Strap (1), Zoom pin (1), Set of printed documentation Designs and specifications are subject to change without notice. 離目盛は目安となります。 オートフォーカスを使用しないときはフォーカス リングをの位置にセットし、 手動でピントを調 節してください。 cannot use a built-in camera flash with this lens. ˎˎ When using a flash, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. 2 Move the POWER ZOOM lever to adjust the focal distance (zoom position). Using the lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. ˎˎ Tenez Using the zoom ring  Identifying the parts 1 Lens hood 2 PUSH (lens hood release) button 3 Focusing ring 4 Zoom ring 5 Iris ring 6 Collar index 7 Lens contacts* 8 Tripod-mounting collar 9 Aperture index 10 Distance index 11 Lens hood index 12 IRIS LOCK switch 13 Iris click switch 14 Distance scale 15 Aperture scale 16 POWER ZOOM lever 17 ZOOM switch 18 Strap hooks 19 Lens mounting index 20 Collar-locking knob 21 Shake compensation switch 22 Zoom pin 23 Hood cap * Do not touch the lens contacts. 2 Rotate the zoom ring to adjust the focal distance (zoom position). [. . . ] RELEASE: You can rotate the iris ring between “A” and f/22 on the aperture scale. When you align “A” on the aperture scale to the aperture index, the camera is set to auto iris mode and the exposure is set by the camera. And you can adjust the amount of light manually between f/4 and f/22 by rotating the iris ring. vignetage ˎˎ Lorsque To remove the lens (See illustration –. [. . . ]