User manual SONY RMT-DSLR2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY RMT-DSLR2. We hope that this SONY RMT-DSLR2 user guide will be useful to you.


SONY RMT-DSLR2 : Download the complete user guide (382 Ko)

You may also download the following manuals related to this product:

   SONY RMT-DSLR2 DATASHEET (177 ko)

Manual abstract: user guide SONY RMT-DSLR2

Detailed instructions for use are in the User's Guide.

[. . . ] You can remove the unit from the bag when the air temperature around the bag has had a chance to gradually rise. If it comes in contact with water, wipe it dry with a clean cloth and take it to the nearest Sony dealer immediately. Do not allow this unit to come in contact with alcohol or other chemicals. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ??Reorient or relocate the receiving antenna. ??Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ????????????????????????? Features The RMT-DSLR2 is a Remote Commander made especially for the Sony Interchangeable Lens Digital Camera (referred below as ?camera?) provided a remote sensor. By operating the Remote Commander, you can shoot images and play them back on a TV. * ??Shooting the image ??Playing back images ??Enlarging or reducing the playback images ??Once you connect the camera to a PictBridge printer, you can easily print images while viewing them on the TV by pressing the PRINT button on the Remote Commander. ** This function only works when the camera is connected to an HDTV with an HDMI cable. Slide show The (Slide show) button on the Remote Commander easily starts/stops a slide show. During a slide show, the following operations are available from the Remote Commander. Printing Once you connect the camera to an HDTV with an HDMI cable, you can easily print images while viewing them on the TV. ????????????? For the State of California, USA only 1 Connect the camera to a TV. For the Customers in Europe ? Identifying the parts 1 2 SEC (shutter release in 2 seconds) button 2 SHUTTER button 3 (Histogram) button 4 DISP (Display) button 5 (Index) button 6 (Rotate) button 7 (Playback) button 8 (Slide show) button 9 MENU button 10 PRINT button 11 Transmitter 12 START/STOP button 13 / (Scale up/down) buttons 14 (Delete) button 15 ?/?/?/?/?For details about printing, refer to the camera?s Operating Instructions. Camera models with a printing function can print with the Remote Commander. [. . . ] Verify that the subject is in focus and press the SHUTTER button, 2 SEC button or START/STOP button*. ??SHUTTER button When the button is pressed, the shutter is released right away. ??2 SEC button After you press the button, the shutter is released about two seconds later. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY RMT-DSLR2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY RMT-DSLR2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.