User manual SONY RDP-XA900IP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY RDP-XA900IP. We hope that this SONY RDP-XA900IP user guide will be useful to you.


SONY RDP-XA900IP : Download the complete user guide (2639 Ko)

You may also download the following manuals related to this product:

   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2615 ko)
   SONY RDP-XA900IP (2659 ko)
   SONY RDP-XA900IP (2615 ko)
   SONY RDP-XA900IP (2524 ko)
   SONY RDP-XA900IP (2524 ko)
   SONY RDP-XA900IP (2524 ko)
   SONY RDP-XA900IP DATASHEET (183 ko)
   SONY RDP-XA900IP AIRPLAY VIA WI-FI NETWORK SETUP (3083 ko)

Manual abstract: user guide SONY RDP-XA900IP

Detailed instructions for use are in the User's Guide.

[. . . ] Personal Audio Docking System Operating Instructions GB Mode d’emploi Manual de instrucciones FR ES RDP-XA900iP WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Updating the Software When a new update is available, the UPDATE indicator lights up green while the unit is connected to the Internet. The unit beeps, then quits or stops all operations automatically and the update starts. 1 Firmly connect the line output jack of a TV (or other component) to either of the AUDIO IN terminals (DIGITAL (OPT) or ANALOG) on the rear of the unit, using a suitable audio connecting cable (not supplied). 2 3 4 5 Notes • When an error occurred, the UPDATE indicator flashes quickly and all other indicators light up. The time required depends on the size of the update content and type of Internet connection you are using. Notes • If each terminal is connected to a different component, and both are playing back, the unit will output sound from the component connected to the DIGITAL (OPT) terminal. • When you use the ANALOG terminal and the volume is low, adjust the volume level on the connected equipment first. If digital audio signals or other signals that this unit does not support are input, the AUDIO IN indicator flashes and sound is not output. All settings of the unit are reset to the factory default settings when you initialize the unit. Tip You can reset only the network settings of the unit to the factory default settings using the RESET (NETWORK) button (page 8). • The unit enters the selected standby mode when it is idle for 20 minutes. • Disconnect and reconnect the AC power cord of the unit, then turn the unit on again. This unit does not operate if you press the buttons of this unit or those of the remote control. Troubleshooting If you run into any problems using the unit, use the following checklist. • Make sure the unit is not in the vicinity of in-use portable phones, etc. • If connecting the unit via a device with a built-in radio or tuner, broadcasts may not be received, or sensitivity may be reduced. Locate the unit farther away from the device and check whether you can listen to the broadcasts satisfactorily. • The unit enters standby or network standby mode when you turn off the power. If you want to completely turn off the power, disconnect the AC power cord. • If you turn the unit to standby mode immediately after turning on it, it may take a while for the unit to enter standby mode. • When the unit is in the network standby mode and receives a command to playback on the “AirPlay” device, the unit turns on and starts playback automatically (page 6). • Update the unit and the iPod to use the latest software beforehand. [. . . ] HIGH RISK ACTIVITIES The SONY SOFTWARE is not fault-tolerant and is not designed, manufactured or intended for use or resale as on-line control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines or weapons systems, in which the failure of the SONY SOFTWARE could lead to death, personal injury or severe physical or environmental damage (“High Risk Activities”). SONY and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities. 31GB EXCLUSION OF WARRANTY ON SONY SOFTWARE You expressly acknowledge and agree that use of the SONY SOFTWARE is at your sole risk. The SONY SOFTWARE is provided “AS IS” and without warranty of any kind, and SONY, its vendors and SONY’s licensors (for purposes of this SECTION only, collectively, “SONY”) EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY RDP-XA900IP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY RDP-XA900IP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.