User manual SONY BDP-S185

[. . . ] 4-290-282-12(1) Operating Instructions Blu-ray DiscTM / DVD Player BDP-S185 © 2011 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] Com/support/ Using the Settings Displays Select [Setup] on the home menu when you need to change the settings of the player. Icon Explanation [Network Update] (page 15) Updates the software of the player. [Screen Settings] (page 15) Adjusts the video settings according to the type of connecting jacks. [Audio Settings] (page 16) Adjusts the audio settings according to the type of connecting jacks. [Easy Setup] (page 18) Re-runs the Easy Setup to make the basic settings. Settings and Adjustments [Screen Settings] x [TV Type] [16:9]: Select this when connecting to a widescreen TV or a TV with a wide mode function. [4:3]: Select this when connecting to a 4:3 screen TV without a wide mode function. X [Screen Format] [Original]: Select this when connecting to a TV with a wide mode function. displays a 4:3 screen picture in 16:9 aspect ratio even on a wide-screen TV. [Fixed Aspect Ratio]: Changes the picture size to fit the screen size with the original picture aspect ratio. X [DVD Aspect Ratio] [Letter Box]: Displays a wide picture with black bands on the top and bottom. 15 [Pan & Scan]: Displays a full-height picture on the entire screen, with trimmed sides. The player automatically detects whether the material is video-based or film-based, and switches to the appropriate conversion method. [Video]: The conversion method suited for video-based material will always be selected regardless of the material. x [Output Video Format] [Audio Settings] x [Audio (HDMI)] [Auto]: Normally select this. Outputs audio signals according to the status of the connected HDMI device. Select [Original Resolution] to output the resolution recorded on the disc. When the resolution is lower than the SD resolution, it is scaled up to the SD resolution. X [BD/DVD-ROM 1080/24p Output] [On]: Outputs the audio obtained by mixing the interactive and secondary audio to the primary audio. X [Dolby Digital] [Auto]: Outputs 1920 × 1080p/24 Hz video signals only when connecting a 1080/24pcompatible TV using the HDMI OUT jack. [Off]: Select this when your TV is not compatible with 1080/24p video signals. x [YCbCr/RGB (HDMI)] [Downmix PCM]: Converts to output Linear PCM signals. [. . . ] A CD or DVD disc will not play if it has not been correctly finalised. For more information, refer to the instruction manual supplied with the recording device. Wav" Note on Discs This product is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some of the music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard, therefore, these discs may not be playable by this product. [. . . ]