User manual SIEMENS KG36NHI32

[. . . ] This appliance complies with snoitcurtsni ytefaS The relevant safety regulations for electrical appliances and is fitted with noise suppression. about these instructions Read and follow the operating and installation instructions. They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you disregard the instructions and warnings in the operating and installation instructions. [. . . ] The refrigerator has now set up its own WLAN network with the network name "HomeConnect". Connect the mobile device with the WLAN network "HomeConnect". Password: "HomeConnect" It can take up to 60 seconds to establish the connection. After successfully connecting, open the Home Connect app on the mobile device. As soon as the refrigerator has been found, enter the network name ("SSID") and the password ("Key") of your own home network (WLAN) in the corresponding fields. If the connection is successful, the freezer compartment temperature display shows On and the energy saving mode display lights up. If the freezer compartment temperature display shows OF, no connection could be established. Check whether the refrigerator is located within the range of the home network (WLAN). Connecting the refrigerator with the app The refrigerator compartment temperature display shows Cn. Press + button until the refrigerator compartment temperature display shows PA and the freezer compartment temperature display shows OF. The freezer compartment temperature display shows an animation and the energy saving mode display lights up. Wait until the refrigerator is displayed in the Home Connect app on the mobile device. If the refrigerator is not automatically displayed, first select Search for domestic appliances and then Connect domestic appliance in the Home Connect app. Refrigerator compartment temperature display shows Pa and freezer compartment temperature display shows On. If the connection fails, check whether the mobile device is connected to the home network (WLAN). If Er appears in the freezer compartment temperature display, reset the Home Connectsettings. verify signal strength You should verify the signal strength if no connection can be established. Press + button until the refrigerator compartment temperature display shows SI. In the freezer compartment temperature display, a value appears between 0 (no signal) and 3 (full signal). If the signal strength is too weak, the connection may be interrupted. Ensure that the connection is not If the refrigerator is connected to the home network (WLAN) and to the Home Connect app, you can activate the cameras: 1. Keep pressing + button until the refrigerator compartment temperature display shows CA and the freezer compartment temperature display shows OF. [. . . ] containers , shelves or storage compartments wobble or stick: Check the removable fittings and re-insert if required. Bottles or receptacles are touching each other: Move bottles or receptacles away from each other. Odottahw­stluaF you call customer service, use this table to check whether you can rectify the fault yourself. ~ "Switching off and disconnecting the appliance" on page 37 If the temperature is too warm, check temperature again after a couple of hours. [. . . ]