User manual SIEMENS KF86FPBEA

[. . . ] This appliance complies with the relevant saf et y i nst r uct i ons Safety regulations for electrical appliances and is fitted with noise suppression. about these instructions Read and follow the instructions for installation and use. They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you disregard the notifications and warnings in the operating and installation instructions. [. . . ] Note: The temperature alarm can be set off without risk to the frozen food in the following situations: When the appliance is switching on. Check that the cause of the temperature alarm has The warning sound will be switched off and the freezer compartment temperature display will briefly indicate the warmest temperature reached in the freezer compartment. Note: The alarm off button remains lit until the set temperature is reached again. This HomeConect appliance is Wi-Fi-capable and can be remotely controlled using a mobile device. In the following cases, the appliance functions like a refrigerator without a network connection and can still be operated manually using the controls: The appliance is not connected to a home network. The Home Connect service is not available in the Country in which the appliance is set up. For an overview of the countries in which Home Connect is available, see www. Ensure that these are also observed if you operate the appliance via the Home Connect app and are not at home when doing so. ~ "Safety instructions" on page 32 Please also follow the instructions in the Home Connect app. After switching on the appliance, wait at least two minutes until internal device initialisation is complete. To implement settings with Home Connect, the Home Connect app must be installed on your mobile device. The Home Connect menu will close automatically when the appliance is not operated for a lengthy period of time. You can find information on how to open the Home Connect menu at the start of the appropriate sections. If a WLAN router with WPS function is available, the refrigerator can be automatically connected to the home network. Keep pressing N/M button cool-fresh compartment until the cool-fresh compartment temperature display shows AC and the freezer compartment temperature display shows OF. The freezer compartment temperature display shows an animation for 2 minutes. The appliance is ready for automatic connection for as long as the animation is displayed. Within those 2 minutes activate the WPS function on the home network router (e. if connection is successful , On flashes in the freezer compartment temperature display. Note: If the freezer compartment temperature display shows OF, no connection could be established. Check whether the refrigerator is located within the Repeat the process or establish the connection If the available WLAN router does not have a WPS function or if this is unknown, you can connect the refrigerator to the home network (WLAN) manually. Press N/M button cool-fresh compartment repeatedly until the coolfresh compartment temperature display shows SA and the freezer compartment temperature display shows OF. [. . . ] ~ "Appliance self-test" on page 57 When the programme has ended, the appliance switches over to normal operation. Your appliance features a self-test programme; this displays the fault which your Customer Service team can rectify. Within the first 10 seconds press and hold settings button for 10 seconds until an audible signal sounds. If 2 audible signals sound after the end of the self-test and the set temperature is displayed, your appliance is OK. [. . . ]