User manual SIEMENS GIGASET C470 IP

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), die ihrerseits das Gigaset-Geschft der Siemens AG fortfhrte. [. . . ] You will receive all necessary data from your VoIP provider. Please note: When making these entries, please remember the VoIP user data is case sensitive. To enter text see page 177. v Settings Telephony VoIP (Enter system PIN) Provider Registr. Change multiple line input: Username: Enter the user name (caller ID) for your VoIP provider account. Username is often identical to your Internet telephone number (the first part of your SIP address, see page 136). Password: Enter the provider-dependent access data that has to be transferred by the phone to the SIP service at registration. Click Save to save the settings. 119 Making VoIP settings Setting the phone's IP address in LAN Setting the phone's IP address in LAN The base station requires an IP address in order to be "recognised" by the LAN. The IP address can be assigned to the base station automatically (by the router) or manually. u If performed dynamically, the router's DHCP server automatically assigns the base station an IP address. The base station's IP address can be changed according to router settings. u If performed manually/statically, you assign the base station a static IP address. This may be necessary depending on your network configuration. Please note: For how to make the local network settings on the Web configurator, turn to page 130. To assign the IP address dynamically, the DHCP server on the router must be activated. Please also read the user guide for your router. v Settings Base Local Network ~ Enter the system PIN and press OK. Change multiple line input: IP Address Type: Select Static or Dynamic. If you select Static, you must manually define the IP address and the subnet mask for the base station in the next lines, as well as the standard gateway and DNS server. IP Address: For IP Address Type = Dynamic: The IP address that is currently assigned to the base station will be displayed. For IP Address Type = Static: Enter the IP address that is to be assigned to the base station (overwriting the current settings). Subnet Mask: For IP Address Type = Dynamic: The subnet mask that is currently assigned to the base station will be displayed. For IP Address Type = Static: Enter the subnet mask that is to be assigned to the base station (overwriting the current settings). The default setting is 255. 255. 255. 0 For the subnet mask see also page 199. 120 Making VoIP settings Activating/deactivating display of VoIP status messages DNS Server: For IP Address Type = Static: Enter the IP address for the preferred DNS server. The DNS server (Domain Name System) converts the symbolic name of a server (DNS name) into the public IP address for the server when the connection is made. Default Gateway: For IP Address Type = Static: Enter the IP address for the standard gateway, by means of which the local network is connected with the Internet. [. . . ] Symmetric NAT A symmetric NAT assigns different external IP addresses and port numbers to the same internal IP addresses and port numbers depending on the external target address. 199 Glossary T TCP Transmission Control Protocol Transport protocol. Session-based transmission protocol: it sets up, monitors and terminates a connection between sender and recipient for transporting data. TLS Transport Layer Security Protocol for encrypting data transfers on the Internet. Toggling Toggling allows you to switch between two callers or between a conference call and an individual caller without allowing the waiting caller to screen the call. [. . . ]