User manual SIEMENS GIGASET A120

[. . . ] Emergency numbers cannot be dialled if the keypad lock (page 3) is activated!Not all of the functions described in this manual are available in all countries. 2 Setting up the telephone for use Step 1: Connecting the base Step 3: Registering the handset to the base and charging the battery pack Place your handset in the base with the display facing forwards. For procedure see page 4. Charging the battery pack 1 2 Connect the phone jack with the phone cord 1 and the mains units (230 V) with the power cord 2 as shown. If you ever purchase another phone cord from a store, ensure that the phone conductors are correctly connected: 3-4 connection of the telephone conductors/EURO CTR37. [. . . ] Enter name Establish date and time of a call Read or not read Delete complete calls list Speed dialling Example: Press key I long ¢c. Last number redial list This list contains the five last dialled numbers. The following functions are available: ¢ Calling back a caller from the calls list: Û Select an entry c. ¢ ¢ EDIT ENTRY COPY TO DIR Add/edit number and use to dial Registering and de-registering handsets You can register up to four handsets on your base station. A Gigaset A12 handset that is not yet registered on a base is registered automatically. Other handsets must be registered manually. Clear the list: Þ ¢MENU¢L ¢OK. ¢ Store number in directory Dialling a number You can select a number from the last number redial list: Þ Select an entry c. ¢ Automatic registering: Gigaset handset A12 Any Gigaset A12 handset that is not registered to a base can be registered automatically. To register a handset for the first time, place it in the base with the display facing forward. Registering takes about 1 minute; a number of icons flash in the display. The handset is automatically assigned the next available internal number (1­4). This number appears in the top left of the display after successful registering, e. g. four handsets have been registered), handset number 4 is de-registered and overwritten. Calls list/Mailbox list Press the display key Û to open the caller list and mailbox list (see Menu Tree, page 9). When the phone is in idle status, new missed calls are indicated by a flashing Û . Example of how the calls list appears: CALLS 02/08 Number of old, read entries Number of new entries Opening the calls list and selecting an entry You can view entries you have already read. Manual registering: Gigaset handset A12 Û s CALLS Open calls list. OK CALLS 05/10 Select the menu item and confirm. On the handset: MENU REGISTER HS enter your system PIN (default is 0000) OK. of entering the system PIN, press the register/paging key on the front of the base (page 1) and hold for approx. The registration process starts. ¢ ¢ ¢ 5 Manual registering: Other handsets Other handsets are registered as follows: 1. On the handset: Start to register your handset as described in its operating instructions. On the base: Press the register/paging key on the front of the base (page 1) for approx. party does not answer or is busy the call will come back to you automatically. Barging in on an external call You are conducting an external call. An internal party can 'barge in' on your call and join in the conversation (all parties hear a beep). Requirement: The BARGE IN function is activated. De-registering handsets You can de-register another handset from any registered Gigaset A12 handset as follows: INT¢ Select handset MENU Activating/deactivating internal barge-in MENU BASE SET BARGE IN ( = on). ¢ ¢ ADD FEATURES ¢ The internal number disappears from the de-registered handset. Handsets that have not been deregistered retain their internal number. ¢ ¢ ¢ OK¢ Enter the system PIN (default is 0000) ¢ OK ¢ DE-REGISTER?¢ OK ¢ a. DE-REG H/SET Internal barge-in The display shows LINE IN USE. [. . . ] With the phone in the idle status, press MENU (open menu), scroll to the required function and then press OK to confirm your choice. 1 SEL SERVICES 1-1 1-2 1-3 1-4 WITHHOLD NO CALL WAITING RINGBACK OFF CALL DIVERT To return to idle status: press key a long. There are two ways in which you can access a function: Scroll with keys t and s, Key in the appropriate digit combination, e. g. MENU I 1 2 to set the time. Select services are functions provided by your network provider. You can only use these services if you have requested them from your network provider. [. . . ]