User manual SIEMENS GIGASET CL1

[. . . ] Do not hold the handset against your ear while it is ringing (incoming call). Do not operate the phone in places where there is a risk of explosion (such as paint workshops). If you give your Gigaset to someone else, make sure you also give them the operating manual. Dispose of the batteries and phone in accordance with environmental regulations. [. . . ] If the auto answer function is activated (page 16) you just need to lift the handset out of the charger to take the call. Using the directory and other lists Using the directory and other lists directory and speed dial list Both lists are used in the same way, except that the h key is pressed to open the directory and the C key to open the speed dial list. The speed dial list is a special directory in which you can store up to 10 particularly important numbers such as the prefixes of network providers (call-by-call numbers). Saving phone numbers in the directory/in the speed dial list "0") for an outside line, then you must save this prefix number as the first digit in all your directory entries. Example: with the name Emma (first letter "E") press the I key twice. If there is more than one entry starting with "E", select the name you want. Using the directory and other lists Dialling with the speed dial list (call-by-call) You can use this function to put a network provider prefix in front of the telephone number (linking). Saving speed dial numbers for fast access You can save eight numbers in the speed dial list for fast access. The digits for fast access (2-9) are entered at the first position in the name field. In order to use speed dialling: Using the directory and other lists Deleting the directory/speed dial list Deletion means the selected list is selected with all entries. Þ Press display key ¢ Select entry ¢ Press c key Þ Press display key ¢ MENU ¢ Press L key ¢ DELETE ?Internal calls, ending a call Internal calls are free of charge between handsets that have the same base. , for handset 2) Select INT ¢ handset ¢ Press c talk key To end the call: Press the a end call key. INT ¢ CALL ALL ¢ Press c talk key To end the call: Press the a end call key. Forwarding a call to another handset ¢ handset ¢ Press c talk key The internal user answers: Press the "end call" key a. Select INT ¢ handset ¢ Press c talk key To end the call: MENU ¢ GO BACK ¢ OK (back to outside caller) Accepting/rejecting call waiting during an internal call If you get an external call while conducting an internal call, you will hear the call waiting tone (short tone). To accept the call: MENU ¢ ACCEPT ¢ OK (you speak to the outside caller). to reject the call: MENU ¢ REJECT ¢ OK (you speak to the internal caller). For an incoming call simply take the handset out of the charger, without having to press the talk key c (default setting: On). You can adjust the handset volume to 3 levels, the ringer volume to 6 levels (6 is increasing volume) as well as select from 10 ringer melodies. [. . . ] the presumption of conformity with the essential requirements regarding Council Directive 99/5/EC is ensured" Senior Approvals Manager The Declaration of Conformity (DoC) has been signed. In case of need a copy of the original DoC can be made available via the company hotline. "We, Siemens AG, declare, that the above mentioned product is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH in compliance with ANNEX V of the R&TTE-Directive 99/5/EC. the presumption of conformity with the essential requirements regarding Council Directive 99/5/EC is ensured" Senior Approvals Manager The Declaration of Conformity (DoC) has been signed. [. . . ]