User manual SIEMENS GIGASET 4000 MICRO

[. . . ] Do not operate the phone in places where there is a risk of explosion (such as paint workshops). Drivers must not use the phone while driving (including the walkie-talkie function). The phone must be switched off at all times in an aircraft (including the walkie-talkie function). If you give your Gigaset to someone else you should also give them the operating instructions. [. . . ] Simply remove the handset from the charging unit (factory setting: "Auto talk" ). A message appears in the display and the status LED flashes to indicate that there are new calls/messages. Change from handsfree talking to the handset Forwarding an external call, enquiry call You can forward an external call to another handset or make an internal enquiry call. If the internal user answers: O To forward the call: Press the end call key . The function is deactivated after ten unsuccessful call attempts or if a call was made in the meantime. Copy to Directory ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] The telephone number is entered. + If you like you can change the number and enter a name (you can also enter an anniversary s. With the directoryyou can store up to 200 telephone numbers and then dial them at the push of a button. You can save the prefixes (Call-by-Call)* of telephone companies in the network access list . The directory and network access list are used in exactly the same way. After selecting the name you can also open the menu, select Display Number , extend/change the number and dial with the talk key #. Speed dialling from the network access list You can store 8 speed dialling numbers in the network access list. Example: Press speed dial key 2 and then enter the network provider's name. The first letter of the name is automatically written in uppercase and the rest in lowercase. Delete characters with Letters are always inserted to the left of the cursor. Inserting a blank 6before a name takes that name to the top of the directory (for example "6Karla" ). Copying the directory/network access list You can copy the entire directory/network access list to another Micro/Comfort handset. If the memory of the receiving handset is full (the last entry is displayed on the sending handset). You can store the date and time of anniversaries so you can be reminded of them. If activated, the alarm clock (Kicon) on your handset will ring every day at the time entered. An alarm call will not be made if room monitoring (babyphone) is activated or during automatic redialling. Turning off the alarm call an alarm call is signalled like an incoming call. [. . . ] You can deactivate the room monitor from an external number (from your mobile phone for example). Best base station) or they must not be registered at any base station. Two handsets are in walkie-talkie mode: Calling handset: Called handset: The call is indicated by a message on the display. The following functions on your 4000 Micro/Comfort handset are not supported by base stations in this Gigaset family: Setting the time (the time is not transferred after the handset has been switched off) Changing the display language Room monitoring (cannot be switched off externally) SMS transfer (SMS-compatible base stations only)* The following functions on your 4000 Micro/Comfort handset are not supported by the above-mentioned base stations: Looking after your phone wipe the base station and handset with a damp cloth or an antistatic wipe. [. . . ]