User manual SHIMANO FH-6500 TECHNICAL INSTRUCTIONS

[. . . ] SI-32U0D-002-00 General Safety Information WARNING · Check that the wheels are fastened securely before riding the bicycle. [. . . ] · If the wheel becomes stiff and difficult to turn, you should lubricate it with grease. · Do not apply any oil to the inside of the hub, otherwise the grease will come out. · You should periodically wash the sprockets in a neutral detergent and then lubricate them again. In addition, cleaning the chain with neutral detergent and lubricating it can be a effective way of extending the useful life of the sprockets and the chain. · If the chain keeps coming off the sprockets during use, replace the sprockets and the chain. · Parts are not guaranteed against natural wear or deterioration resulting from normal use. · For maximum performance we highly recommend Shimano lubricants and maintenance products. Installation of the HG sprockets For each sprocket, the surface that has the group mark should face outward and be positioned so that the wide parts of the gear projections on each sprocket and the A part (where the groove width is wide) of the freewheel body are aligned. Wide part A ac-14T The groove is wide at one place only. Sprocket spacers Lock ring Technical Service Instructions SI-32U0D-002 Freehub FH-6500 Specifications Freehub Model No. of spoke holes Overlock nut dimensions · For installation of the HG sprockets, use the special tool (TL-LR15/LR10) to tighten the lock ring. [. . . ] XBC SZK Printed in Japan. Tightening torque: 35 - 50 N·m {305 - 434 in. [. . . ]