Detailed instructions for use are in the User's Guide.
[. . . ] SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIN MANUAL DE OPERAO
Printed on 100% post-consumer recycled paper. Papel 100% Reciclado-Cuidado do Meio Ambiente.
Printed in Japan Imprim au Japon Impreso en Japn Impresso no Japo TINS-B124WJZZ 04P02-###
PORTUGUS
LIQUID CRYSTAL TELEVISION TLVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LQUIDO TELEVISOR DE CRISTAL LQUIDO
ESPAOL
FRANAIS
LC-15L1U
ENGLISH
LC-15L1U
LC-15L1U
LIQUID CRYSTAL TELEVISION ENGLISH
OPERATION MANUAL
IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV.
Model No. : Serial No. :
U. S. A. ONLY
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] If you know the Channel of the EDS signal carrier in your area, set "EDS CH SET" to "MANUAL" and select "START". In case, the message "EDS CH (XXX) EDS DATA IS NOT AVAILABLE" displays, set "EDS CH SET" to "AUTO" when the AUTO CLOCK Setting screen appears. If broadcasting channels are not memorized, EDS signals cannot be received even when the "EDS CH SET" is set to "AUTO". (See page 43. )
25
ENGLISH
SETTING THE CLOCK (Continued)
MANUAL CLOCK Setting
If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK.
POWER
1
DISPLAY PIC. Press a/b to move the cursor to "SET UP", and press ENTER.
SLEEP
ENTER
2
ENTER/ a/b/c/d
MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON VCH I P BLOCK SET UP
MUTE
BRIGHT TV/VIDEO MENU
FLASHBACK VOL CH
SELECT :
ENTER : ENTER SET UP
EX I T :
MENU
MENU
3
Press a/b to move the cursor to "CLOCK", and press ENTER.
RETURN BLUE SCREEN LANGUAGE CHSETT I NG CLOCK
[ OFF ]
SELECT :
ENTER : ENTER CLOCK
EX I T :
MENU
4
Press a/b to move the cursor to "MANUAL CLOCK", and press ENTER.
RETURN AUTO CLOCK MANUAL CLOCK OFF
5 6
Press a/b to move the cursor to "TIME", and press ENTER.
SELECT : ENTER : ENTER EX I T :
MENU
Press c/d to set the time, and press ENTER.
12:00AM 11:59PM
11:59AM 12:00PM
MANUAL CLOCK RETURN T IME [ 12: 0 0AM] DST [OFF ]
Note: Make sure to press ENTER after adjusting the time. Otherwise, the time will not be set.
ADJUST :
ENTER : ENTER
EX I T :
MENU
7
Press MENU to return to the main screen.
Daylight Saving-Time (DST) Adjustment
The Daylight Saving-Time changes as shown below. Set the "DST" to "ON" to forward the clock by 1 hour. To rewind the clock by 1 hour, set the "DST" to "OFF". finishes.
1:00AM 2:00AM
3:00AM
4:00AM
1:00AM
2:00AM
26
TV SIGNALS IN YOUR REGION
This product is factory set to comply with the TV broadcasting system in the United States. The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set.
Country TV broadcasting system
Color: NTSC TV ch: US ch Color: NTSC TV ch: US ch
Factory setting of color system TV
NTSC (N358) US ch NTSC (N358) US ch
User setting TV
Not required or N/A Not required or N/A
The World Multi Auto System is compatible with all color systems indicated below. 1 2 3 4 5 6 7 N358 N443 PAL PAL-M PAL-N SECAM PAL-60
Video
World Multi Auto System World Multi Auto System
U. S. A. Canada
27
ENGLISH
BATTERY CHARGE and TRANSMISSION SETTING
Battery Charge
The "BATTERY CHARGE" is set to "ON" when shipped from the factory. The battery will deteriorate if it continues to be charged after having been fully charged. It is recommended to set the "BATTERY CHARGE" to "OFF" when the battery is not used frequently.
POWER
DISPLAY SLEEP PIC. Press a/b to move the cursor to "PRESET", and press ENTER.
ENTER
MUTE
BRIGHT TV/VIDEO MENU
MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON VCH I P BLOCK SET UP
FLASHBACK VOL CH
SELECT :
ENTER : ENTER
EX I T :
MENU
MENU
3 4 5
Press a/b to move the cursor to "BATTERY CHARGE", and press ENTER. Press MENU to return to the main screen.
PRESET RETURN TRANSMISSION SETTING BR I GHTNESS [ BR I GHT ] [ STEREO] MTS ] AUTO POWER OFF [ OFF [ NORMAL ] P I CTURE FL I P [ IN ] AV2 I N / OUT BATTERY CHARGE
SELECT :
ENTER : ENTER
EX I T :
MENU
Transmission Setting
When shipped from the factory, the "CHANNEL" of the "TRANSMISSION SETTING" is set to "AUTO", and the "DISTANCE" is set to "NEAR". However, when reception is poor due to the presence of an interference source in close proximity, change the settings for "CHANNEL" or "DISTANCE" to ensure normal reception.
AC wall outlet
AC cord
AC adapter
Transmission
Wireless Center [1] Preparing for "TRANSMISSION SETTING"
TV main unit
1 2 3 4
Connect the antenna to the Wireless Center. Press MENU to display the MENU screen.
NOW ACCESSING.
28
BATTERY CHARGE and TRANSMISSION SETTING (Continued)
Transmission Setting (Continued)
5
POWER
Press a/b to move the cursor to "PRESET", and press ENTER.
MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON VCH I P BLOCK SET UP
DISPLAY SLEEP PIC. FLIP
ENTER
SELECT :
MUTE BRIGHT TV/VIDEO MENU FLASHBACK VOL CH
ENTER : ENTER
EX I T :
MENU
ENTER/ a/b/c/d
6
Press a/b to move the cursor to "TRANSMISSION SETTING", and press ENTER.
MENU
PRESET RETURN TRANSMISSION SETTING BR I GHTNESS [ BR I GHT ] [ STEREO] MTS ] AUTO POWER OFF [ OFF [ NORMAL ] P I CTURE FL I P [ IN ] AV2 I N / OUT BATTERY CHARGE
SELECT :
ENTER : ENTER
EX I T :
MENU
[2] Setting Channel Four settings can be selected for the communication channel consisting of Auto, A, B and C. When set to "AUTO", available channels that can be transmitted are set automatically. It is recommended to normally set the communication channel to "AUTO".
AUTO
A
B
C
1
Press a/b to select "CHANNEL", and then press ENTER.
TRANSMISSION SETTING RETURN CHANNEL [ A] STATUS : A D I STANCE [ FAR] STATUS : NEAR
SELECT :
ENTER : ENTER
EX I T :
MENU
2
Press c/d to select "AUTO", and then press ENTER. The available settings change in the order shown below each time c/d is pressed.
TRANSMISSION SETTING RETURN CHANNEL [ AUTO ] D I STANCE [ FAR] STATUS : NEAR
AUTO
A
B
C
SELECT : ENTER : ENTER EX I T :
MENU
"ADJUSTING CHANNEL SETTING. " is displayed on the screen and the communication channel is set automatically.
ADJUSTING CHANNEL SETTING.
Displayed in yellow
29
ENGLISH
BATTERY CHARGE and TRANSMISSION SETTING (Continued)
Transmission Setting (Continued)
[3] Setting Distance Select the Distance mode that gives the best reception and picture quality. [. . . ] The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. [. . . ]