User manual SANYO NC-MQN06

[. . . ] For customer service issues, please call 1-866-848-9912 or visit us online at www. sanyobatteries. com. Charger Model #NC-MQN06 Call GE SANYO at (866) 848-9912 · SANYO Energy (U. S. A. ) Corp. , c/o XWG, 1840 County Line Road Huntingdon Valley, PA 19006 sanyo@accessoryhelp. info · www. sanyobatteries. com Parts and usage With this charger, you can charge up to 4 AA or 4AAA eneloop Ni-MH batteries. How to charge 1) This charger is designed to charge 2 or 4 pcs of AA or AAA Ni-MH rechargeable batteries. 2) If you want to charge 4 pcs of AA or AAA, put batteries into the charger compartments, taking care to observe polarity (+/-) as indicated inside the charger. [. . . ] Otherwise, may cause high heat, fire breakout, electric shock, or harm to human body. Warning · Do not connect the (+) and (-) ends with metal objects. When carrying or storing batteries, avoid direct contact with metal objects. · If leaked liquid gets on the skin or clothing, wash off with clean water immediately. · Do not connect 10 batteries or more in series. 4) Swing plug out and plug into AC100-240V outlet. If plugged in upside down, it will finish charging before it is fully charged. 6) When charging is complete, the indicator lights will turn on constantly. 7) After charging is done, unplug the charger from the outlet and swing plug back into place. Warning Do not allow metal objects come into contact with charger. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Do not charge non-rechargeable batteries. Caution Operating temperature range for Ni-MH battery eneloop · Discharge 23°F to 122°F · Recharge 41°F to 95°F · Store - 4°F to 86°F · Outside of the indicated range, battery's performance and life-cycle may decrease. Do not use these batteries together with dry cells, other types of batteries, new or old batteries together, or batteries with different charge levels. How to insert a AAA battery Spec Input AC100-240V ~ 50/60Hz 8W Output Size 118 x 72 x 32. 5 mm ~ 98g Weight AA - 2/4 x 1. 2V -- 300mA AAA - 2/4 x 1. 2V -- 150mA Temp. range 41°F ­ 95°F Charge time Suitable Battery 1 ­ 4 battery Ni-MH AA HR-3UTG ( Max 3000mAh. 750mAh*) Caution May deform charger causing high heat, leakage, or explosion. Avoid unstable locations like areas with strong magnetic fields or dust. [. . . ] · To remove, push on the + terminal of the AA eneloop battery until it releases. Charging Safety Do not charge near hot temperatures like an electric blanket, stove, near direct sunlight, inside of a car, or under hot sun, etc. In such cases, battery would not be fully charged because the temperature inside of the charger will become hot, and the safety protective function will be activated and stop charging. Please charge at temperature between 41°F to 95°F. Indication light Appearance Indicator lights flashing Indicator lights are on Indicator lights are off Status Charging properly Finish charging Default mode Handling Normal Batteries are ready for use a) No battery put inside charger b) Battery connected incorrectly c) The charger has internal failure d) Power off C or D spacer AA battery [. . . ]