User manual SANYO POA-PJNM01

[. . . ] PJ Master Owner's Manual POA-PJNM01 Projectors and PDP Monitors Administrative Tool Trademarks The PJ Master is a trademark of Sanyo Electric Co. , Ltd. Microsoft, Windows, Windows 2000, Windows XP, Microsoft SQL Server 2000 Desktop Engine (MSDE2000A) are registered trademarks of Microsoft Corporation. Other products or brand names in this manual are registered trademarks or trademarks of their respective owners. * Unauthorized use of a part or whole of the contents in this manual is prohibited. [. . . ] - If you select the server on the tree view or status list view window, the setting will be effected to the targets linked under the selected server. 2. The current setting value of the selected target will be displayed on the window. When selecting the multiple target, it displays the last setting value. 3. Enter the threshold value of warning time, or internal temperatures A, B or C of the target. The setting window will close. * 0 to 99999 hours can be set for warning time, and 0 to 99. 9 degrees in Celsius or 32. 0 to 211. 9 degrees in Fahrenheit can be set for warning temperature. * The default values are as follows; Warning Time: 99999 hours Warning Temperature: 99. 9 degrees in Celsius or 211. 9 degrees in Fahrenheit 30 Global setting Global setting The PJ Master controls target by sending the specified control command via the network. The PJ Master provides 24 kinds of basic commands for projector and 6 kinds of basic commands for PDP monitor initially. You can also edit their commands or add new commands easily according to your projector , PDP monitor or usage. Sending a command 1. Select a target on the status list view window or a server on the tree view window. - When setting the multiple targets together, select targets and/or servers on the status list view window with pressing "Shift" or "Control" key. - If you select the server on the tree view or status list view window, the setting will be effected to the targets linked under the selected server. 2. Click or button on the tool bar or select Global Setting from Projector or PDP menu. The setting window will appear. - The commands which are not effective to the selection are disabled. 3. Tick check boxes next to the title name and then click OK to execute the command. After that the targets will operate according to the sending commands. * If there are some errors on the targets or servers, the PJ Master receives error information from the servers or targets and indicates further details on the error log window. (p. 36) PJ Master Owner's Manual 31 Chapter 3 Basic operation Default commands for projector TITLE POWER ON POWER OFF VOLUME UP VOLUME DOWN MENU ON MODE MENU OFF MODE DATE SETTING TIME SETTING SCREEN NORMAL SCREEN WIDE BLUE BACK ON BLUE BACK OFF DISPLAY ON DISPLAY OFF LOGO ON LOGO OFF POWER MANAGEMENT ON POWER MANAGEMENT OFF PJ NAME SETTING SMTP SETTING ADMINI ADDRESS SETTING MAIL1 ADDRESS SETTING FANSPEED MAX FANSPPED NORMAL TEXT C00 C01 C09 C0A C1C C1D LF DATE yyyy/mm/dd LF TIME hh:mm CF SCREEN NORMAL CF SCREEN WIDE CF BBACK ON CF BBACK OFF CF DISP ON CF DISP OFF CF LOGO ON CF LOGO OFF CF P-MANE ON CF P-MANE OFF LF PRJNAME PROJECTOR1 LF SMTP 192. 168. 0. 1 LF ADMIN admini@your company name LF MAIL1 user@your company name CF FANSPEED MAX CF FANSPEED NOR Default commands for PDP monitor TITLE POWER ON POWER OFF VOLUME UP VOLUME DOWN MENU ON MODE MENU OFF MODE TEXT C00 C01 C09 C0A C1C C1D * You can define new commands, see item "Customizing the command list" on chapter 4. (p. 46) 32 Global setting Editing the predefined command When changing the command according to the target or resetting date or time to the targets, take the following steps; 1. Select a target on the status list view window or a server on the tree view window. Click or button on the tool bar or select Global Setting from Projector or PDP menu. - The commands which are not effective to the selection are disabled. 3. Tick check box next to its title name and click OK to execute the command. * The command data are stored in the defined files, Define_PJ. def for projector or Define_PDP. def for PDP monitor, in the folder PMS/Program. If you want to add the new command, enable you to edit these defined files. [. . . ] Tick check box next to the command name you want to use for condition check. * To make a new condition check command, click Add to open the edit condition window and enter command and status, and set retry on or off. The setting window closes. Condition 1 Command: CF STATUS Status:80 Retry: ON Condition 2 Command: CF MODELNM Status:PLC-XF60 Retry: OFF 5-3. The updating command is sent to all the target servers and each server starts updating the firmware of the projectors sequentially. * To check that the firmware of the target was updated successfully, check the version indication on "PJ Ver. " column on the status list view window. [. . . ]