User manual SANGEAN RCR-2

[. . . ] The Shock Hazard Marking and Associated Graphical Symbol is provided on the bottom panel of unit. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall not be placed on the apparatus. 2 Main features ( 1 ) 14 station memories ( 7 each on AM/FM bands ) ( 2 ) Digital radio controlled clock with date display Date and time displays are checked and if necessary corrected daily with an exact radio controlled time antenna signal ( 3 ) Nap timer Adjustable from 10-120 minutes ( 4 ) Alarm with Humane Wake System ( HWS ) The alarm begins quietly and gradually becomes louder before switched off ( buzzer alarm only ) ( 5 ) Radio alarm Woken up by the favorite station ( 6 ) Two independent alarm functions ( 7 ) Alarm week day selection ( 8 ) Adjustable alarm level ( buzzer alarm only ) ( 9 ) Headphone jack (10) Time Zone adjustment (PST , MST , CST , EST ) 3 GB 4 5 Controls Power on/off and Sleep timer 2 Nap timer 3 Display button to display time and radio frequency 4 Display backlight on/off button 5 Buzzer alarm level adjustment 6 RESET 7 Time zone adjustment 8 Date adjustment 9 Time adjustment 10 Alarm 2 button 11 Alarm 1 button 12 Headphones socket 13 Time/Date/Alarm set button 14 LCD display 15 Tuning Up/Down and Snooze button 16 Station memories and alarm week days selection 17 AM/FM band and alarm mode selection also Daylight Saving Time (D. S. T. ) set . 18 Volume control 19 External Antenna for radio controlled clock 1 GB 6 LCD display A B C D E F G H I J K L M N Radio band and a. m. /p. m. display Time set Daylight Saving Time (D. S. T. ) Alarm indicator Sleep timer Nap timer Alarm a. m. /p. m. [. . . ] Press the SET button once again to confirm the hour, now the minute digits in the time display begin to blink. Press the TIME button once again to confirm the time setting with a beep. symbol will appear indicating this 9 Note: If there is Daylight Saving Time ( D. S. T. ) system in your place, after pressing SET button, press Mode button once will advance one hour on time setting, Display will show D. S. T. Press SET button, display will blink year with a beep and a small Y (year) will appear, 1. Press SET button again and follow the setting of year to set the month and date . You can always adjust the time manually whenever is required by following above procedures. GB 10 Radio operation Turn on the radio with the Power on/off key 1. Tune into desired stations Manual station selection 1. With the key 15 Tuning + and -, you can tune into the frequency of your desired stations. Scanning tuning Press and hold key 15 + or ­ for more than 0. 5 seconds and release, the radio will search for the next station. Select a memory preset button and press for more than 2 seconds until a confirmed beep sounds and display M stops blinking. Note: When you store a new station in a memory slot, the station previously in that slot is automatically erased. Recall the station memories Recall the station memories, simply select the required bands and press required station memory slot buttons 1-7. Volume You can select the required volume by adjusting the Volume control button 18. 11 Alarm Clock Alarm setting can be done while the appliance power is during on or off position. The alarm clock is equipped with two alarm systems which can be operated independently of each other either with Human Wake System buzzer or with a radio (radio alarm clock ). Select the desired station by station memory button 1-7 or simply tune the radio station. Press alarm SET button 13, display will blink both alarm hour and alarm mode with a beep. Press alarm Mode button 17 to select alarm radio mode until display shows . Press + or ­ to adjust required alarm hour then press SET button again, display minute digits will blink. Press week day selection 1-7 ( Sunday ­ Saturday ) to select required alarm week day. Display will show the days of the week on which you wish to be woken by the alarm. [. . . ] Press 1-7 ( Sunday ­ Saturday ) of button 16 for selection. GB Snooze To interrupt the alarm signal ( radio or beep tone/HWS), press the Snooze button 15. The alarm will continue for an hour if not being interrupted. Stop the alarm signal To stop the alarm signal totally, press button 1 Power on/off. 14 Nap timer With key 2, you can select the period for the short term alarm in 10 minutes steps from 10-120 minutes. If you wish to turn off the Nap timer before the time is up, simply adjust the number of minutes by pressing NAP key to OFF and release. When Nap timer signal is on, turn off the timer signal by pressing key 1 Power on/off. [. . . ]