User manual SANGEAN DT-120CL

[. . . ] Selected Band 90 minutes auto shut off System lock FM stereo indicator Battery power indicator Memory presets DBB on Frequency Battery cover is located on the back of the unit. Make sure that the battery is positioned in accordance with the indicated diagram. [. . . ] Important Note: The radio will be auto shut off within 10 seconds when you unplug the earphone from earphone jack for battery power saving. Band AM DT-120 520 - 1710 kHz (10 kHz) DT-180V 522 - 1629 kHz (9 kHz) DT-180V 520 - 1710 kHz (10 kHz) Antenna Internal/Rotate radio for bes reception Band Antenna FM External/Make sure the earphone in plugged into earphone jack Band TV Frequency DT-120 522 - 1629 kHz (9 kHz) Frequency TV channels 2-13 (DT-180V) External/Make sure the earphone Antenna is plugged into earphone jack For saving battery power, this radio is designed to auto shut off after 90 minutes operation, LCD display shows . For continuous listening if necessary, pressing Power On/Off button for more than 2 seconds until LCD display disappears. Press and hold down the Tuning Control buttons for more than half a second and release the button to commence Scan Tuning. Desired station may be selected by pressing the Tuning Control buttons intermittently until the desired station is reached. Or pressing and holding the Tuning Control until the desired station is reached. When the desired station is reached, press and hold Memory button for more than 2 seconds until display M x stop flashing followed with a beep (via earphone). Turn on the radio, select required band then simply press and release Memory station button. For Northern American countries and some South American countries, AM tuning step is 10 kHz. Change the AM band tuning step from 9 kHz to 10 kHz When radio is OFF, press and hold Tuning UP button then switch on radio by pressing Power On/Off button until LCD display flashes 10 and then 520, indicating AM step has been changed to 10 kHz tuning step. [. . . ] 5 mm diameter (stereo) The company reserves the right to amend the specifications without notice. If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. [. . . ]