User manual SAMSUNG SR8846

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG SR8846. We hope that this SAMSUNG SR8846 user guide will be useful to you.


SAMSUNG SR8846 : Download the complete user guide (49123 Ko)

Manual abstract: user guide SAMSUNG SR8846

Detailed instructions for use are in the User's Guide.

[. . . ] CAUTION/WARNING SYMBOLS USED WARNING WARNING Indicates that a danger of death or serious injury exists. Indicates that a risk of personal injury or material damage exists. CAUTION OTHER SYMBOLS USED NOTE Explains terms to help users understand how use the product properly. 2_ Safety information Safety information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR ROBOTIC VACUUM CLEANER. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL · · · · · · Use only as described in this manual. Do not operate the robotic vacuum cleaner or charger if it has been damaged in any way. If the cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped in water, return it to a customer care center. [. . . ] Cleaning Mode display - Each time the cleaning mode button is pressed, the corresponding cleaning mode is displayed. (a) Auto Mode: This icon turns on when Auto cleaning mode is selected. (b) Spot Mode: This icon turns on when Spot cleaning mode is selected. (d) Edge Mode : " " is on when Edge cleaning mode is selected. BUTTON PART 6. After selecting a cleaning mode, press the ( ) button to start cleaning. 8. Recharging - When this button is pressed, the Recharging icon is turned on and robotic vacuum cleaner will return to the charger station to charge its battery. 18_ Assembling the cleaner Operating the cleaner INSTALLING THE ROBOTIC VACUUM CLEANER INSTALLATION ORDER 1. Turning the Power Switch on or off To use the robotic vacuum cleaner, you must turn on the Power Switch at the bottom of the main unit. Installing the Charger To charge the robotic vacuum cleaner, you must first install the charger. Since the battery is discharged when the product is purchased, you must fully charge the battery before use. Charging the Battery You should charge the battery completely before using the robotic vacuum cleaner. 03 OPERATING THE CLEANER TURNINg ThE POWER SWITCh ON OR OFF To use the robotic vacuum cleaner, you must turn the Power Switch on. - If the icons are not turned on, it indicates that the battery charge is depleted. - Before you discard this product, dispose of batteries in an environmentally safe manner. An increased charging time and a shorter battery life indicates the near end of the battery life. Please contact an authorized customer care center to replace your battery. The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. 22_ Operating the cleaner Operating the cleaner USING THE ROBOTIC VACUUM CLEANER STARTINg/STOPPINg CLEANINg You can run or stop all robotic vacuum functions. Each robotic vacuum function only runs when the Power Switch is turned on. When the robotic vacuum is operating, press the ( ) button to cancel the operation and select a function. 03 OPERATING THE CLEANER Turning the power on or off Turning the power on - Main unit: Press the ( ) button. - The main unit buttons, battery level indicator and cleaning mode icons are turned on. Turning the power off - Main unit: Press and hold the ( ) button down for 3 seconds. - All icons except for the battery level indicator are turned off. Using the main unit buttons Starting or stopping cleaning Starting - Main unit: Select Auto / Spot / Max / Edge mode by using the ( ) button and then pressing the ( ) button. Pressing the ( ) button without selecting cleaning mode starts to perform the Auto mode cleaning. - When cleaning is stopped, the robotic vacuum cleaner stops. Operating the cleaner _23 Operating the cleaner USING THE ROBOTIC VACUUM CLEANER RECHARGING You can have the robotic vacuum cleaner return to the charger to charge the battery by using the Recharging button. When the robotic vacuum cleaner is operating, press the ( ) button to cancel the operation and press the Recharging button. 1. [. . . ] Excessive foreign substances on the side rotating brush can damage the brush. 34_ Maintain tools and filter Maintain tools and filter CLEANING THE ROBOTIC VACUUM CLEANER CLEANING THE DRIVING WHEEL You must turn off the Power Switch at the bottom of the main unit before cleaning the robotic. If the robotic vacuum cleaner suddenly starts to zigzag, there may be foreign substances stuck on the driving wheel. 04 MAINTAIN TOOLS ANd FILTER 1. When cleaning the driving wheel, place a soft cloth on the floor and flip the main unit, placing it down carefully. 2. Check for foreign substances and remove them using a stick or a pair of blunt nippers if necessary. Maintain tools and filter _35 Troubleshooting CHECkLIST BEFORE SVC CALLS SYMPTOM Robotic vacuum cleaner does not operate at all before cleaning. · Is the Power Switch turned on? MEASURE TO TAkE · Install the dust bin. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG SR8846




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG SR8846 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.